How to Measure Cabinet Doors

Do you want to give your kitchen cabinets a complete makeover? Adding new cabinet doors is the perfect way to modernize and update the look of this important space. But before you invest in buying them, it’s important to understand how to measure cabinet doors correctly so that they fit correctly when installed.

How to Measure Cabinet Doors

Measuring cabinet doors can be simple and straightforward with the right tools. Having the correct measurements is essential when it comes to choosing new door styles that will fit nicely over existing frames.

Knowing how to measure your cabinet doors accurately will save time and money during installation and ensure any furniture makeover goes off without a hitch!

From tips on accurate measurement techniques to selecting the door style that best fits your theme, we’ll provide all you need to know about properly measuring cabinet doors.

What Will You Need?

To start measuring your cabinet doors, you’ll need the following tools:

  1. Tape measure
  2. Pen and paper for taking notes
  3. A level for ensuring accuracy when measuring and installing.

Once you have your tools ready, it’s time to start measuring.

10 Easy Steps on How to Measure Cabinet Doors

Step 1. Take the Measurements:

Before you begin the process of measuring your cabinet doors, it’s a good idea to take a few notes on the measurements of each individual door, as well as any particular characteristics that you want to remember when selecting your new doors.

It will also help to know the sizes of any existing frames and hinges. As a general rule, you should measure the length and width of each door as well as any openings for knobs or handles.

Step 2. Measure the Width:

Using Your Tape Measure

Using your tape measure, hold it up against the frame and measure from one side to the other. Be sure to make a note of this measurement, as this will help you when selecting the door size that best fits your existing frame. If you’re replacing the whole door, then you’ll need also to measure the width of the existing hinges.

Step 3. Measure the Height:

Next, use your tape measure to take note of the height of each individual cabinet door at its widest point. Once again, make sure you take accurate measurements so that you can find doors that fit in perfectly with your kitchen cabinets! Don’t forget to write down your measurements on the paper and label them appropriately.

Step 4. Confirm Your Measurements:

Now that you’ve taken all your measurements confirm them by using your level tool to double-check that all the measurements are accurate. This will ensure that any new cabinet doors you select fit perfectly in your existing frames. Be careful to record any discrepancies you find and make appropriate adjustments when ordering your new doors.

Step 5. Choose the Right Doors:

Now that you have all the right measurements, it’s time to select the doors that will fit perfectly in your kitchen. It’s important to choose a door style that reflects your kitchen’s overall look and feel while staying within the size constraints of your existing frames.

You can find a huge range of door styles to choose from, so make sure you take your time and select something that will look great for years to come.

Step 6. Get Professional Help:

If you need additional help or advice on measuring cabinet doors correctly, consider consulting a professional cabinet maker or installer. They can provide valuable advice on choosing the right style and size for any kitchen makeover project.

Additionally, they can provide detailed advice on installation and measurements, ensuring that all your cabinet doors look perfect in the end.

Step 7. Make Sure You Have All The Necessary Parts:

Before starting the installation, ensure you have all the parts and pieces required for installing new cabinet doors. This includes screws, hinges, and any decorative hardware.

Installing New Cabinet Doors

If you’re unsure what items you need, consult a professional cabinet maker or installer. They can provide detailed advice on the specific parts and pieces you’ll need to install your new cabinet doors properly.

Step 8. Test-Fit the Doors:

Once you’ve collected all the necessary parts, it’s important to test-fit your cabinet doors before installation to make sure that everything fits as expected. This will help ensure your new kitchen makeover goes off without a hitch! Moreover, it’s a great way to double-check that all the measurements you took earlier are accurate.

Step 9. Install Your Cabinet Doors:

Follow the instructions provided with your cabinet doors and use the right tools for the job before beginning installation. It’s essential to be careful when fitting in order to avoid any mistakes or damage caused by incorrect installation. Because this is a DIY job, taking your time and ensuring everything is done correctly is important.

Step 10. Enjoy Your Refreshed Kitchen Cabinets:

Once you’ve finished installing your beautiful new cabinet doors, you can sit back and enjoy the refreshed look of your kitchen. With the right measurements and a bit of patience, measuring and installing new cabinet doors is easy! Remember to take your time and enjoy the process of updating your kitchen.

So there you have it—10 simple steps on how to measure cabinet doors correctly. Remember always to double-check your measurements using a level tool for accuracy and consult a professional if you need help. With the right measurements and a little bit of patience, your kitchen makeover will be complete in no time!

5 Additional Tips and Tricks

Make Sure to Use a Ruler
  1. When measuring your cabinet doors, make sure to use a ruler or measuring tape that is marked in inches. This will help ensure accuracy and consistency with measurements.
  2. Take notes as you measure each door so that you can refer back to them if necessary. This will help make sure all the measurements are correct and consistent.
  3. When measuring, use a level or other straight edge to ensure your measurements are accurate and parallel to the floor.
  4. Measure both the inside and outside of the cabinet doors for a more precise measurement overall.
  5. For larger cabinet doors, consider using multiple measures in order to get an accurate reading of their size and dimensions for greater accuracy when ordering new cupboard doors or replacing existing ones.

By following these tips and tricks, you will be able to easily and accurately measure your cabinet doors with ease!

5 Things You Should Avoid

  1. Measuring Your Cabinet Doors Incorrectly: To ensure that your new doors fit perfectly, it’s important to measure them accurately. Measure from the top of the door to the bottom and from one side to the other, taking into account any decorative trim. Make sure that the measurements are both level and accurate before ordering.
  2. Neglecting to Measure Your Cabinet Openings: Cabinet doors should be slightly smaller than the opening they are going in to ensure a snug fit. Measure each individual opening so you know exactly what size of the door will properly fit each space.
  3. Not Accounting for Hinges: Depending on the style of hinge you choose, it may affect how large your doors can be and where they’re placed in relation to one another. Before measuring your cabinet doors, measure out the area where the hinges will go and factor them into your dimensions accordingly.
  4. Not Factoring in the Door’s Handles or Knobs: Door handles and knobs take up room, so you should include them in your measurements when ordering doors. If you’re unsure of what size handles are most appropriate for your cabinets, consult a professional who can provide guidance.
  5. Ignoring the Gap Between Doors: Since cabinet doors need to swing open and close, there must be a small gap between them to allow this movement. Generally, you should leave a 1/16-inch gap between each door. Make sure you account for this space when measuring as well.

By following these tips and avoiding common mistakes, you will be able to measure cabinet doors accurately and successfully purchase new ones that fit perfectly. With the right measurements, you can open your door to a new look quickly!

Are All Cabinet Doors the Same Size?

Your Cupboard Door

No, all cabinet doors are not necessarily the same size. Depending on your style and cabinet type, your cupboard door measurements may vary. However, most kitchen cabinets come in standard sizes that range from 30 inches to 48 inches wide and 12 inches to 24 inches deep.

When measuring your cabinet doors, always double-check with a level tool for accuracy and consult a professional if you need help. With this information, you can ensure that any new doors will fit perfectly for a successful kitchen makeover!

Remember, when measuring your cabinet doors, it’s important to be precise and mindful of any decorative details you may have. By measuring accurately, you can ensure that your new cupboard doors will fit perfectly in their designated spot. With the right measurements and a few tips, you can be sure that your kitchen will look its best!

How Do You Choose a Cabinet Door?

Choosing a cabinet door is an important decision that should be taken into consideration when remodeling your kitchen. There are several factors to consider, such as style, material, and size.

When Remodeling Your Kitchen

It’s important to pick out a door that matches your current decor and fits properly in the allotted space. If you’re unsure which type of door would look best in your kitchen, consult a professional who can guide you on what materials and designs are most suitable for your home.

Additionally, ensure you measure accurately before ordering new doors so they fit snugly in each opening. By taking all these details into consideration, you’ll be able to choose the perfect cabinet doors for your kitchen!


Measuring cabinet doors accurately is a crucial step before replacing or refurbishing them. It can make the difference between an ugly, ill-fitting upgrade and one that looks brand-new and professional-grade.

To get it right, you’ll need to have your tape measure handy and a level for accuracy. Be sure to take measurements multiple times and double check to ensure that everything lines up properly before making any purchases or drilling holes.

By taking the time to make precise calculations, you should be able to install beautiful cabinet doors quickly and easily – without having to worry about costly mistakes or expensive fixes down the road.

Hopefully, the article on how to measure cabinet doors was helpful. With the right tools and measurements, you can be sure that your kitchen will look its best! Good luck with your project!

You Can Check It Out to Measure a Sofa for a Cover

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment