How to Build Toe Kick for Wall Cabinets

If you’re looking for an easy and budget-friendly way to revolutionize the look of your kitchen, why not consider adding toe-kick wall cabinets? This type of cabinet has a unique, raised design that can transform any room in no time and without breaking the bank. Not only do they bring benefits like additional counter space – but they also provide better accessibility to items stored within them.

How to Build Toe Kick for Wall Cabinets

In this blog post, we’ll explain exactly how to build toe kick for wall cabinets from start to finish – including what materials and tools you will need, along with detailed instructions on each step of the process. Let’s get started!

Tools and Materials You Will Need to Build Toe Kick for Wall Cabinets

  1. Circular saw
  2. Clamps
  3. Hammer
  4. Level
  5. Jigsaw
  6. Measuring tape
  7. Wood screws and nails
  8. Sandpaper
  9. Plywood (two pieces, cut to size)
  10. Paint or stain of your choice (optional)

Step by Step Directions on How to Build Toe Kick for Wall Cabinets

Step 1: Start With Measuring the Area

The first step is to measure the area of your walls where you intend to install your toe-kick wall cabinets. This will allow you to determine what size plywood sheets you will need to purchase and how many wood screws and nails you’ll need for the project.  Measuring the area is also important for making sure everything fits properly.

Use Screws or Nails to Fasten

Step 2: Cut Plywood Sheets to Size

Next, use your circular saw to cut the plywood sheets so that they fit perfectly in the area you measured. Ensure to measure twice before cutting once – and be very careful while operating the saw. Once you have cut the sheets to size, use a hammer, nails, or wood screws to secure them together.

Step 3: Create a Toe Kick Groove

Now, you’ll need to create the toe kick groove for your cabinets. Measure and mark out an area of the plywood with a jigsaw that is slightly smaller than the width of the cabinet. Use a level to ensure that the groove is straight and even. Once you have marked out the area, cut it out carefully with your jigsaw.

Step 4: Sand and Paint/Stain Plywood

The final step is to sand down any rough edges on the plywood using sandpaper. This will help the plywood look smooth and professional. After sanding, you can paint or stain the plywood to give it a more finished look. Once dry, your toe-kick wall cabinets are ready for installation!

We hope this tutorial has been helpful in teaching you how to build toe kicks for wall cabinets. With these easy steps, you can transform the look of your kitchen in no time!  Good luck!

Plywood Using Sandpaper

Tips and Tricks to Build Toe Kicks for Wall Cabinets

  1. To get started, measure the area where you want to install your wall cabinets. This will give you an idea of how much space you have for the toe kick and help you determine the size of cabinet boxes that will fit.
  2. Most toe kicks are about four inches high and can vary in depth depending on the type of cabinets you are installing.
  3. If the wall is not perfectly straight, use a level to make sure that your toe kick is installed in a straight line.
  4. Add an extra inch or so on each side for safety when cutting the toe kick pieces. This will prevent any gaps from forming between the cabinet boxes and the kicks.
  5. Use a jigsaw to cut the toe kick pieces from plywood or MDF. Make sure that all of your cuts are straight and precise so that the cabinets fit together properly.
  6. If you plan to paint or finish your toe kicks, it is best to do so before installation. When you are ready to install the cabinets, this will save time and effort.
  7. To attach the toe kicks, use a drill and screws. Make sure that all of your screw holes are in line with each other and that they penetrate into the wall studs for maximum strength and stability.
  8. When installing the cabinets, make sure that each piece is level and square. This will ensure that the walls are even and that the doors will open and close properly.
  9. To finish your project, add a trim or a quarter round to hide any gaps between the wall and the toe kick.
Using a Jigsaw or Circular Saw

These tips and tricks allow you to build toe kicks for your wall cabinets. This will create a professional look and make it easier to access the contents of your cabinets. Good luck!

Things Need to Consider While Building Toe Kick for Wall Cabinets

1. Measure the Area Accurately

The very first step in building toe kicks for wall cabinets is to measure the area where you want to install them accurately. Make sure that you use a measuring tape and not just rely on your eyes because any error can cause difficulty while installing the toe kick later on.

2. Choose the Right Material

When it comes to choosing a material for a toe kick, think about its affordability and durability. Generally, wood is preferred as it looks great with wall cabinets, but you can also opt for other materials, such as laminate or vinyl, if your budget allows you to do so.

3. Cut the Toe Kick Pieces According to the Measurements

Once you have the material and measurements ready, it is time to cut the toe kick pieces according to those measurements. Make sure you use a saw with a fine-toothed blade to make the cuts precise and smooth.

4. Install the Toe Kick Pieces

Now, it’s time to install the toe kick pieces in your wall cabinet. It is important to use the right tools while doing this, so make sure that you have a drill, screws, and other necessary accessories handy before starting the installation process.

5. Attach Toe Kick Pieces with Wall Cabinets

Once the toe kick pieces are installed, it is time to attach them to the wall cabinets. Ensure you use high-quality screws so they don’t come off easily and provide a secure fit. You can also use construction adhesive for a better grip.

6. Sand, Seal, and Paint

Finally, it is important to sand, seal, and paint the toe kick pieces so that they look attractive and last for a long time. Use good quality sealant and paints in order to get the desired results.

With these considerations in mind, you’re now ready to go ahead and build the perfect toe kick for your wall cabinets. Follow these steps carefully, and you’ll be able to get the job done quickly and easily. Good luck!

Precaution Needs to Follow for Building Toe Kick for Wall Cabinets

  1. The most important precaution to follow when building toe kicks for wall cabinets is to make sure that you measure twice and cut once, along with double-checking your measurements.
  2. Take your time and be precise in order to ensure the best results.
  3. You may need a jigsaw or circular saw to make the cuts on the toe kick. Use proper safety gear, such as eye and ear protection and gloves, while using any power tools.
  4. You should also wear protective glasses when measuring or cutting to avoid accidentally kicking up any wood chips into your eyes.
  5. After making all the cuts, sand down any rough edges before you attach the toe kick piece to your wall cabinet.
  6. Lastly, be sure to use wood glue or another strong adhesive when attaching the toe kick piece in order to ensure a secure fit.

Following these precautions will ensure that your toe kicks are installed safely and securely. This will allow you to enjoy your beautiful new wall cabinets for years!

Wear Protective Gear

Frequently Asked Questions

How Do I Make Sure the Toe Kick is Level and Even? 

When measuring and cutting the toe kick material, it is important to use a level and measure twice before cutting. Once the toe kick is attached to the wall cabinet, use a level again to ensure that it is even.

How Do I Attach the Toe Kick to the Wall Cabinet? 

There are several methods of attaching a toe kick, including using nails or screws or using construction adhesive. If using nails, make sure to pre-drill holes in the toe kick before nailing it into place. If using construction adhesive, use a generous amount and spread evenly. Make sure to allow enough time for the adhesive to set properly before continuing with the installation.


In summary, building your own toe kick for wall cabinets is not a difficult task and can be accomplished with minimal cost and effort on your part. To avoid any damage or errors in installation, take the time to double-check all measurements and carefully cut pieces to size. 

Pay attention to the specific instructions given regarding supplies and use only the highest quality materials you can find. With the above instructions and precautions kept in mind, hopefully, you can learn about how to build toe kick for wall cabinets properly and safely. This will help you secure the toe-kicks properly and enjoy your new wall cabinets for many years!

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment