How to Take Apart Ingenuity Bassinet

Taking apart your Ingenuity Bassinet can help you if you need to move it, store it away for a while, or just clean the parts that are not easily accessible.

Knowing how to take apart an Ingenuity Bassinet is important because of the safety risks of incorrect assembly and disassembly. It’s also helpful because taking apart the Bassinet lets you clean its parts more thoroughly, which is essential for hygiene and health reasons.

How to Take Apart Ingenuity Bassinet

Taking apart an Ingenuity bassinet provides a variety of advantages. First, it allows you to clean each component for more efficient sanitation thoroughly. Second, it allows you to inspect the components and internal workings of the bassinet to diagnose any problems or identify areas that need repair or replacement.

You can find step-by-step instructions on How to Take Apart Ingenuity Bassinet in this blog article.

Tools You Will Need

  • Phillips-head screwdriver
  • Flathead screwdriver
  • Ratchet wrench set
  • Hex key set
  • Pliers
  • Hammer
  • Adjustable wrench
  • Cable cutters
  • Utility knife
  • Needle nose pliers
  • Safety glasses
  • Work gloves.

Now that you have gathered your tools, it is time to take apart your Ingenuity Bassinet. Remove the mattress pad, sheet, and other bedding from the bassinet. Next, you will need to loosen all of the screws on the outside shell of your bassinet frame.

Remove the Mattress Pad

Step-by-step Instructions for How to Take Apart Ingenuity Bassinet

Step 1: Inspect the Bassinet

Before attempting to take apart your Ingenuity Bassinet, ensure it is not damaged or needs repairs. Locate the four caster screws on the bottom of the bassinet and begin unscrewing them with a Phillips head screwdriver. Be careful not to strip any screws during this process.

Step 2: Remove the Top and Bottom Platforms

After unscrewing all four screws, slowly lift off the top platform. This will reveal the bottom platform, which can be easily removed from the bassinet. Carefully detach each of the slats from one another by pushing down on them. Be sure to keep track of which slat is for the top or bottom of the bassinet.

Step 3: Disconnect the Motorized Attachment

If your Ingenuity Bassinet has a motorized attachment, disconnect it from the main unit by unscrewing the screws that hold it in place. Once the motorized attachment has been removed, unscrew all remaining connections with a Phillips head screwdriver. The connections should come apart easily.

Step 4: Remove Any Remaining Attachments

If your Ingenuity Bassinet has any other attachments, such as music boxes or toys, remove them from the main unit gently. Carefully fold up both sides of the bassinet until they are flat against each other. This will make it easier to carry and store when not in use.

Step 5: Remove the Mattress and Pad

Gently pull out the mattress from the frame of the bassinet, followed by the pad. These items can be easily cleaned and stored for future use. Once all of the components have been apart, place them in a-free storage unit or bag you are ready to reassemble your Ingenuity Bassinet.

These steps will allow you to take apart your bassinet quickly and safely.

A Phillips Head Screwdriver

Tips for How to Take Apart Ingenuity Bassinet

  1. Ensure the product is unplugged from any power source before taking it apart.
  2. Gather the tools and supplies needed to take apart the Ingenuity Bassinet, such as a screwdriver set and scissors.
  3. Carefully read through any instructions that come with the product or online for instructions on taking it apart.
  4. Separate any screws or fasteners from the main parts of the product and place them in a labeled container for easy retrieval when reassembling.
  5. Work on a flat, sturdy surface and ensure all components are securely held in place as you take apart each piece.
  6. Take your time to avoid any mistakes.
  7. Lastly, once you have completed taking apart the Ingenuity Bassinet, properly dispose of all packaging materials and components that are no longer needed.

You can take it apart quickly without any trouble with the proper care and attention. Remember these tips, and you’ll easily take apart the Ingenuity Bassinet.

Are There Any Special Techniques or Tips That Can Make It Easier to Take Apart an Ingenuity Bassinet? 

Taking apart an Ingenuity Bassinet can be a daunting task. However, there are some steps you can take to make it easier.

First, make sure that all components are labeled clearly and easily understood.

Second, reviewing the manufacturer’s instructions and any parts diagrams provided with the bassinet before disassembling it is important. This will make identifying the components easier and figuring out the correct steps for taking them apart.

Third, when disassembling parts secured with screws or bolts, you should be cautious. Removing these items improperly can cause damage to the bassinet.

It is best to take your time when removing screws or bolts to not strip any of the threads. Fourth, you may need to use a pair of pliers or other tools to loosen or remove certain items during disassembly. Be sure to read instructions and use caution when using these tools carefully.

Are There Any Special Instructions or Warnings That Should Be Followed When Taking Apart an Ingenuity Bassinet? 

Taking apart an Ingenuity Bassinet requires special care and attention. To ensure safety, you should always take the necessary precautions when handling any item made of plastic or metal, including those found in a bassinet.

Ensure the Product is Unplugged

Before attempting to take apart the Ingenuity Bassinet, ensure it is unplugged from all power sources and cooled to room temperature. When taking apart the bassinet, it is important not to force any parts that may feel stuck, as doing so can cause damage to the frame or other components of the bassinet.

When disassembling the Ingenuity Bassinet, ensure all screws and bolts are placed in a safe location where they won’t get lost. This will make it easier to reassemble the bassinet after taking it apart. It is also important to be aware of small parts, like nuts and bolts, that may come off and get lost during the process.

For those unfamiliar with taking apart an Ingenuity Bassinet, a few online tutorials are available to help guide the process.

How Long Will the Process of Taking Apart an Ingenuity Bassinet Typically Take? 

Taking apart an Ingenuity Bassinet can take 15 minutes to 1 hour, depending on your familiarity with the assembly instructions. Generally speaking, it should take one hour if all the necessary tools and materials are readily available.

Three main steps are involved in taking apart an Ingenuity bassinet: removing the fabric, removing the structural pieces, and finally, disassembling hardware components.

First, you will need to remove the fabric covering the bassinet frame. This can be done by unzipping or untying any straps holding it in place. Once the fabric is removed, inspect areas where staples may have been used to secure fabrics and padding materials.

Carefully remove all of the staples with a flathead screwdriver or pliers. Next, you must remove the structural pieces that hold the bassinet together. This includes screws and bolts, which can be easily removed using a Phillips head screwdriver.

What Are Some Common Mistakes People Make When Taking Apart an Ingenuity Bassinet?

Taking apart an Ingenuity bassinet is a straightforward process with simple instructions, but mistakes still happen. It’s important to be careful and follow the directions closely, as incorrect assembly or disassembly can lead to potential safety hazards and injury.

Some of the most common mistakes people make when taking apart an Ingenuity bassinet include:

  • Incorrectly Tightening or Loosening Screws: The most important step during the assembly and disassembly of an Ingenuity bassinet is ensuring that all the screws are properly tightened or loosened. Tighten each screw until it’s firmly secure, but not so much that it won’t move freely when needed. Remember to check this when you remove the bassinet and adjust the screws accordingly.
  • Failing to Align Parts Properly: When taking apart an Ingenuity bassinet, it’s important to ensure all parts are properly aligned before disassembling them. This will ensure that everything fits back together correctly after disassembly.
  • Not Using the Right Tools: When taking apart an Ingenuity bassinet, it’s important to ensure you use the right tools for the job. Using the wrong size screwdriver or other tool can cause damage to the screws and parts, leading to further complications during assembly or disassembly.
  • Not Following Instructions: It’s easy to skip steps when taking apart an Ingenuity bassinet, but this can lead to problems. Ensure you follow each step carefully and check the instructions often to ensure no steps have been skipped or missed.
Use a Pair of Pliers

By following these tips and paying close attention to the instructions, you can easily take apart your Ingenuity bassinet without making any mistakes. Doing so will ensure that it is properly and safely disassembled, giving you peace of mind regarding your baby’s safety.


Taking apart an Ingenuity Bassinet is relatively easy. With the right tools and patience, you can easily detach each component for cleaning or storage. It’s important to take extra care when disassembling the bassinet, as some parts may be fragile.

Taking your time and following the instructions carefully will ensure you successfully take apart your bassinet without any issues. Doing so will also help to maintain its quality and extend its life span.

I hope this article has been beneficial for learning how to take apart ingenuity bassinet. Make Sure the preventive measures are followed chronologically. 

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment