How to Set Autonomous Desk Height Memory

Autonomous Desk Height Memory is an amazing feature that makes everyday work much easier. By setting and saving the perfect desk height, you can easily adjust your workspace at the press of a button. This means that you don’t have to waste time manually adjusting your desk every time you get back from a break or when someone else wants to use your desk.

How to Set Autonomous Desk Height Memory

There are numerous advantages of setting an autonomous desk height memory on your electric standing desk. An easy-to-program memory function allows you to quickly and easily adjust the height of your desk to suit your needs without having to adjust it each time manually.

This eliminates the need for constantly reaching down to find a manual adjustment knob or selector switch. You can find step-by-step instructions on how to set autonomous desk height memory in this blog article.

Step by Step Processes for How to Set Autonomous Desk Height Memory

Step 1: Inspect the Work Area

Before proceeding with the process of setting up autonomous desk height memory, it is important to inspect the work area. Ensure there are no obstructions and check if all necessary components for the set-up are present.

Step 2: Connect Desk Components

Connect all components required for the set-up, such as power cables and any connectors or plugs. Connect the power hub to a reliable power source and turn on the switch if required. You must plug in the hub correctly, as it is what will activate the autonomous desk height memory setting.

Connect the Power Hub

Step 3: Download Software from Autonomous Website

Go to Autonomous’s official website and download the software needed to set up autonomous desk height memory. Make sure that you install the correct version of the software for your type of desk. Once the software has been downloaded, follow the instructions provided on-screen during installation. Pay close attention to all prompts and steps to properly install the software.

Step 4: Activate Autonomous Desk Height Memory Setting

Once the software has been installed, open it and activate the autonomous desk height memory setting. This will allow you to set a specific preset desk height that your desk will remember for future use. After activating the autonomous desk height memory setting, select your preferred desk height. The desk should remember this height when activated in the future.

Step 5: Save Setting and Shut Down Computer

After selecting your preferred desk height, save the setting and shut down your computer or device. This will allow the autonomous desk to remember your selected height for the next time you use it. Turn on the autonomous desk to test if the height memory setting has been saved correctly. The desk should move to your preferred height automatically.

Once the height memory setting is activated, you can enjoy using it for future use without manually adjusting the height every time. Following these ten steps, you can successfully set up autonomous desk height memory!

This will save time and effort so you can focus on other important tasks. Enjoy the convenience of an automated workspace with Autonomous’s desk height memory setting.

Safety Tips for How to Set Autonomous Desk Height Memory

Use the Programmed Buttons
  1. If you are unfamiliar with setting autonomous desk height memory, having a second person around is best to help guide and support you.
  2. Before starting the process of setting memory height, ensure that your desk is stable in its current position on both surfaces and legs.
  3. Read through your desk’s instruction manual or find steps online, as this will help you understand how to set up autonomous desk height memory properly.
  4. Autonomous desks usually require a sensor device and power source before setting up memory height, so ensure these are connected correctly and securely.
  5. Use the programmed buttons on your desk to set up the desired height presets for whenever you want to switch heights during your workday.
  6. Once everything is ready, test out the new system by sitting at different heights to make sure that everything is working as it should.
  7. Don’t be afraid to ask for help or advice from a professional if you need assistance setting-up memory height for your autonomous desk. This will ensure the job is done right and save you time and effort in the long run.

Following these safety tips will help you make sure your autonomous desk height memory is set up correctly and securely.

How Can You Store Your Preferred Desk Settings in a Memory? 

If you have an Autonomous standing desk, you can customize and store your preferred settings in memory. Setting up the memory will take just a few simple steps:

  • First, adjust the height of your desk to whatever position is comfortable for you. Then press and hold down the ‘M’ key on the display panel until it beeps twice, indicating that the current height has now been stored in the memory.
  • You can store up to three different heights in a single memory setting. To do this, simply adjust the desk to different heights and press the ‘M’ key after each adjustment. After completing all three settings, you can release the ‘M’ key and the memory is now set.
  • Press and hold the ‘M’ key to activate a memory setting until it beeps once. You can also adjust the height of your desk while a memory setting is active by pressing and holding either the up or down arrow keys on the display panel. However, doing so will override whatever was stored in that particular memory.
  • Storing your preferred desk heights in a memory setting can be helpful if you alternate between sitting and standing throughout the day or frequently switch positions. You can easily return to a comfortable height position without having to manually adjust each time.
Position is Comfortable for You

By following these steps, you can easily store your preferred desk height settings in memory and access them quickly whenever needed.

Are Any Recommended Methods for Testing and Verifying Autonomous Desk Height Memory Results? 

There are a few recommended methods when verifying that Autonomous Desk Height Memory is functioning correctly. First and foremost, you should always ensure each user profile’s settings have been properly set up and saved.

This will ensure that the desk height adjustments are executed as desired. Secondly, each time an adjustment is made to an individual’s profile, it is important to test the results manually.

This will confirm that each user’s desired height setting has been accurately saved and that the adjustment was successful. Lastly, it is recommended that regular maintenance of Autonomous Desk Height Memory be conducted to ensure its functionality and reliability over time.

This can include cleaning and lubricating any moving parts or inspecting for signs of wear or damage. By taking these steps, you can rest assured that Autonomous Desk Height Memory is working properly and can provide the correct adjustments each time.

What Potential Issues Can Arise if I Fail to Set Up the Memory Correctly? 

If you need to set up the memory correctly for your Autonomous Desk, there are several potential issues that may arise. These include:

  • Difficulty adjusting desk height when seated or standing – When the memory is not properly configured, it may be difficult to adjust the desk height when switching between sitting and standing positions. This can be inconvenient and disruptive to workflow.
  • The memory of incorrect desk height settings – When the memory is not configured properly, it may remember the wrong desk height setting. This can be frustrating and mean that you must constantly readjust the desk height each time you switch from sitting to standing or vice versa.
  • Inaccurate readings from sensors – If your memory needs to be set up correctly, the sensors that measure desk height may be accurate. This could result in incorrect readings when attempting to adjust your desk, causing further frustration or disruption of workflow.
Sensors That Measure Desk Height

Fortunately, setting up memory for Autonomous Desks is easy. The detailed instructions provided by the manufacturer should provide you with all the information needed to ensure your memory settings are properly configured.


In conclusion, setting the height memory of your autonomous desk is easy with just a few steps. First, ensure you have unpacked your desk and all its components properly and securely. Then, use the supplied instructions to assemble it.

Once the desk has been assembled, plug it into a power source and use the digital controller or app on your phone to program the desired heights and memories into the desk. This article has been beneficial for learning how to set autonomous desk height memory. Make Sure the preventive measures are followed chronologically.

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment