How to Raise Platform Bed

Raising a platform bed can be beneficial for many reasons. It can provide additional storage space beneath it and make the room appear larger by creating more height in the room. In addition, raising the bed off the ground helps improve air circulation around it, reducing dust mites and allergens, known triggers of asthma attacks.

How to Raise Platform Bed

A platform bed can also make cleaning the floor underneath easier.

One of the major advantages of a platform bed is that it takes up much less space than traditional beds. Platform beds are typically lower to the ground and don’t require box springs, saving you even more floor space. This means that you can fit more furniture into your bedroom or any other room where you place your bed.

You can find step-by-step instructions on how to raise platform bed in this blog article.

Tools You Will Need

  • A Power Drill
  • Screwdriver Bits
  • Screws of Different Lengths
  • Wooden Blocks
  • Tape Measure
  • Leveler
  • Hammer
  • Wrench or Socket Set
  • Carpenter’s Square
  • Pliers

Step-by-step Instructions for How to Raise Platform Bed

Step 1: Inspect Your Platform Bed Frame

Before raising your platform bed, inspect the frame to ensure it is in good condition. This includes checking for any weak points or breaks in the frame that could be compromised if you lift the bed too high. You will need a few basic supplies to raise your platform bed. These include a power drill, screws, a saw, and an adjustable wrench.

You may also need wood for reinforcements or extra support.

Step 2: Measure How High You Want to Raise the Bed Frame

Using a measuring tape or ruler, measure the distance from the floor to where you want the bed frame to be raised. This will also give you an idea of how much extra height you need to add to the existing frame so that your mattress and box springs can fit properly.

Using a Measuring Tape

Step 3: Attach Bed Risers or Blocks Underneath the Platform Bed

You can purchase bed risers with adjustable heights or use wooden blocks to raise your platform bed. If you are using bed risers, make sure to consult the instructions for proper installation and measurements. Using wooden blocks is a more budget-friendly alternative but requires a bit of extra work. Measure the width and length of the bed frame and cut the wooden blocks to fit underneath.

Drill pilot holes into the wood for the screws and attach them securely with a wrench or screwdriver.

Step 4: Attach Additional Support

If you feel your platform bed needs extra support, you can use 2x4s or other types of lumber to reinforce the frame. Cut the 2x4s to size and attach them along both sides of the bed frame with screws. Make sure they are securely fastened to support the mattress’s weight and box spring.

Step 5: Place Your Mattress and Box Spring on the Platform Bed

Now you can place your mattress and box spring on the raised platform bed frame. Ensure it is properly centered on the frame to avoid any sagging or discomfort when sleeping. Test the bed to ensure it is comfortable and stable before use. Once you have completed these steps, your platform bed should be properly raised and ready to use.

Make sure to inspect the frame regularly for any signs of wear or damage that may require maintenance or repairs.

Inspect the Frame Regularly

Tips for How to Raise Platform Bed

  1. Make sure to clear the area of any debris or other items that might be in the way, such as furniture and rugs.
  2. Wear protective eyewear and gloves when you are working with power tools or sharp edges.
  3. Use a level to ensure the platform bed is even before you begin the process of raising it.
  4. Use the right tools for the job, such as a power drill, ratchet set, and screwdriver.
  5. Take your time when you are raising the platform bed since it can be difficult to fix any mistakes that are made.
  6. Secure all bolts and screws tightly to avoid any potential accidents or mishaps.
  7. Double-check your platform bed’s safety before you use it, and periodically check for any loose screws or bolts.

By following these tips, you can ensure your platform bed is safely raised, secure, and ready to provide comfortable support for many years to come.  

How Often Should You Check the Height of Your Platform Bed? 

It is important to check the height of your platform bed regularly, especially in the first few months after it is set up. This will allow you to ensure that all parts are securely connected, and nothing has shifted out of place. After this initial period, checking at least once a year should be enough.

If you notice any changes in height during this period, this could indicate a potential issue with your platform bed. It is also important to check the height of your platform bed when it has been moved to a new location or after any renovation in your home. This will ensure that all parts are still secure and functioning correctly.

Additionally, if you ever notice an uneven height on one side of the bed, it is important to adjust the legs and supports to address this issue.

Finally, if you ever need to raise the height of your platform bed for any reason, be sure to do so carefully and slowly. Adjusting the legs in small increments is recommended, as a sudden change in height can cause instability or even damage parts of the bed.

Raise the Height of Your Platform

Also, if you are raising the platform bed more than a few inches, it is important to check that all supports are securely tightened and in place. These precautions will help ensure your platform bed stays sturdy and safe for years.

How Do You Raise a Platform Bed Without Damaging It? 

Raising a platform bed can be difficult, especially if you’re worried about damaging it in the process. But with the right tools and techniques, raising your platform bed should be possible without causing any permanent damage. Here are some tips for how to do this safely and effectively:

  • Use furniture sliders or moving discs to raise the bed. These sliders make it much easier to move and adjust the platform bed without putting too much strain on your back or lifting it yourself.
  • If you don’t have furniture sliders, try using a dolly or other wheeled cart to help transfer the weight of the bed evenly across its surface. This method is especially helpful if you need to move the bed more than a few inches off the ground.
  • If your platform bed has legs, you can also use these as leverage when raising it. Simply lift one side of the bed at a time and then adjust each leg with a screwdriver until it reaches the desired height.
  • When raising the bed, always make sure to have someone else help you lift it so that it stays balanced and doesn’t put too much strain on one side or the other. This will also reduce the risk of damaging the bed frame while adjusting its height.

These are just a few tips for how to raise a platform bed without damaging it. With the right tools and techniques, you can easily adjust the height of your bed without causing any damage.

How Do You Know When Your Platform Bed is Secure and Safe?

  • Test the bed’s stability by attempting to push or pull it from side to side, ensuring that it does not rock or move in any way.
  • Check all screws and bolts for tightness, as these are what secure the platform bed frame together. Any loose screws should be tightened with an appropriate wrench before proceeding.
Check All Screws and Bolts
  • Place one hand on each side of the bed and take a few steps back to ensure that it does not move or wiggle in any way. If it does, you will need to tighten all screws and bolts again until the platform bed is secure.
  • Ensure all the support beams underneath the bedframe are secured and aligned properly, as these bear the mattress’s weight.
  • Place a level on top of the platform bed to ensure that it is even and balanced from left to right and back to front. If there is an imbalance, you may need to adjust the screws or bolts until the bed is even.

Once you have completed these steps, your platform bed should be secure and safe for use. With regular maintenance and checking of screws and bolts, it should stay in good condition for many years to come.

How Can You Prevent Squeaks and Creaks in Your Platform Bed? 

To prevent squeaking and to creak in your platform bed, it is important to ensure the bed frame is installed correctly. Assembling a platform bed incorrectly can cause different frame components not to be secured properly, leading to noise when you move around on the bed. If you follow the instructions that come with the bed, you can prevent these issues. Additionally, when assembling the bed frame, it is important to use the screws included with the purchase of your platform bed and tighten all screws properly during assembly.

It is also a good idea to check for loose components and ensure they are tightened regularly. This will ensure that every part of the frame is secured and that there are no rattling or squeaking noises coming from your bed. To ensure your platform bed lasts longer, it is important only to use a mattress that fits the size of the frame.

If you attempt to put a bigger mattress on the frame than what it was designed for, this can cause extra strain on the frame, leading to premature deterioration of your platform bed.

Attempt to Put a Bigger Mattress


In conclusion, raising a platform bed can be done by gathering the right materials, determining your bed’s measurements, and attaching key components like the legs, slats, and headboard. With careful planning and attention to detail, you can easily raise your bed and make it look just like something out of a magazine.

By taking the time to understand how to raise a platform bed, you can save yourself money and the hassle of having to buy a new one. With just some basic DIY skills and knowledge, you can create a beautiful platform bed that will last for years to come. I hope this article has been beneficial in learning how to raise platform bed. Make Sure the precautionary measures are followed chronologically. 

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment