How to Mount Surge Protector Under Desk

Mounting surge protectors under the desk can be a great way to free up space and keep your workspace looking neat. This is especially important if you have multiple computers, printers, or other electronic devices in one area. A surge protector will help protect these devices from electrical surges that could potentially damage them.

How to Mount Surge Protector Under Desk

It also helps organize the cords and cables of all your devices, keeping them neat and organized.

Mounting a surge protector under your desk has several advantages. First, it allows easy access to the power outlet and surge protector, making it easier to plug in devices quickly and safely.

Additionally, mounting the surge protector off the floor and out of sight can reduce clutter in your workspace while still providing ample protection from electrical surges. In this blog post, You will learn in detail how to mount surge protector under desk.

Step-by-Step Processes for How to Mount Surge Protector Under Desk

Step 1: Inspect the Desk

Before you begin, take the time to make sure your desk is suitable for mounting a surge protector. It should have at least one flat surface that is large enough for the base of the surge protector. Additionally, check to see if there are any existing power outlets near the bottom of the desk or behind it where you could plug in the surge protector once it’s mounted.

Step 2: Prepare the Desk

Can Also Paint the Area

Next, ensure your desk is free of sharp edges that could harm the surge protector. This may require using a file or sandpaper to smooth out any rough areas. If desired, you can also paint the area around where the surge protector will be mounted to give the desk a more cohesive look.

Step 3: Place Surge Protector on Desk

Lay out your surge protector in the desired spot and mark the mounting holes with a pencil or pen. Make sure to double-check that your marks are accurate, as you will use them for drilling later. Using a drill and the appropriate bit size, drill holes where your marks are. Make sure to go slowly and be careful not to over-drill or damage any of the desk’s surface area.

Step 4: Secure the Surge Protector with Screws

Place the surge protector in its desired spot and use the screws provided to secure it in place. Ensure not to overtighten the screws, as this could damage both the surge protector and the desk.

If your desk does not have any existing power outlets, you will need to connect a 3-prong power cable to the surge protector. To do this, use the included screws and secure them into place on the underside of the desk.

Step 5: Connect Surge Protector to Outlet

Plug your surge protector into an existing power outlet or one connected via a 3-prong power cable. Make sure that all connections are secure. Before you use the surge protector, testing it out and ensuring it works properly is important.

To do this, plug something into one of the outlets on the surge protector and turn it on. If everything works as expected, your surge protector is ready for use.

Step 6: Arrange Cables

Once everything is plugged in, you can now arrange the cables to make them less visible and keep your desk area neat. Use cable ties or other methods to secure the cables together and keep them out of the way.

Now that you’ve successfully mounted your surge protector under the desk, you can enjoy your new setup.

 To Secure the Cables Together

Make sure to periodically check the surge protector for any signs of wear and tear and replace it if necessary. With these steps, you should now have an organized and practical workspace.

Safety Precautions for How to Mount Surge Protector Under Desk

  1. Always follow the manufacturer’s instructions for installing and mounting your surge protector.
  2. Make sure that you have the right size or type of screws so that they fit securely in the wall or desk when drilling into it.
  3. When considering where to mount your surge protector, keep in mind that cords and connections may be a tripping hazard.
  4. Do not install your surge protector in an area where it can be damaged by water or moisture.
  5. Make sure to use the correct tools and appropriate drill bits for drilling into the wall or desk when mounting the surge protector.
  6. If you are mounting the surge protector on a desk, ensure that the desk can accommodate its weight and size.
  7. Make sure to always check the surge protector before, during, and after installation to ensure that all wiring is connected properly and that it is secure in place.

By following these safety precautions when mounting a surge protector under your desk, you can rest assured knowing that you and your electronics are protected from possible damage.

How Often Should the Surge Protector Be Checked for Proper Operation or Safety Issues? 

When it comes to surge protectors, it’s essential to check them regularly. How often you need to check your surge protector can depend on your unit type and the environment in which it is used.

 To Check Them Regularly

Generally speaking, inspecting your surge protector every few months for any signs of damage is a good idea. Inspect the cord and plug for any fraying or damage, and check all the outlets to ensure none are blocked by dust or dirt.

Additionally, you should test the surge protector for proper functioning every six months using a voltage tester to ensure it still provides adequate protection against electrical surges.

If your surge protector is exposed to a particularly harsh environment, such as an area with high humidity or dust, you may need to check it more frequently.

If the surge protector is mounted directly onto your desk or furniture and in direct contact with the elements, regular inspection is necessary to ensure it remains in good condition and continues to protect your connected electronics from power surges.

How Can You Make Sure Your Surge Protector is Properly Maintained and Working Correctly? 

When mounting your surge protector under a desk, there are several steps you should take to ensure that the protector is working correctly. First, check the wiring of your surge protector and make sure they are not frayed. If they show signs of wear and tear, replace them immediately.

After that, check for any exposed wiring or terminals. These can cause a short circuit and should be isolated immediately.

Next, carefully inspect the surge protector for any defects that may have occurred over time. Any faults on the device, such as an old wire, should be fixed or replaced before mounting it under your desk. Finally, make sure to mount your surge protector correctly.

This means ensuring that it is securely fastened and at least three inches away from the wall or any furniture.

How Often Should You Replace the Surge Protector? 

Surge protectors should be replaced regularly to ensure that they provide the most effective protection against surges and power outages. As a general rule, it’s a good idea to replace your surge protector every three to five years – or whenever you experience a local power outage or surge in voltage.

Additionally, if you notice any signs of damage or fading on your surge protector, you should replace it as soon as possible. You can also check the manufacturer’s instructions for specific advice on when to change the product.

To Ensure It is Properly Installed

When you purchase a new surge protector, it’s important to ensure it is properly installed and secured under your desk. This can help ensure that the device can provide the most effective protection possible against power outages and surges.

To mount your surge protector under your desk, you’ll need a few basic tools, including a drill, screws, and anchors. First, you should mark the four points where you would like to secure the surge protector. After that, you should drill the four holes and insert the anchors.

What Are Some Common Mistakes People Make When Mounting a Surge Protector Under Their Desk? 

When mounting a surge protector under a desk, the most common mistake is not taking into account the amount of space that the surge protector can take up.

Many people assume that since their desk has plenty of room for them to work and store their things, that the surge protector will fit in this same area without any problems. Unfortunately, this isn’t always true.

Many surge protectors are quite bulky and can take up a large amount of space under the desk, which can make it difficult to work or store items beneath the desk.

Another common mistake is not taking into account the cords and cables that will need to be connected to the surge protector.

It’s important to measure out where each cord and cable needs to be placed before mounting the surge protector so that there is enough room for them to fit. Otherwise, they can become tangled or damaged when trying to connect them after the surge protector has been mounted.


In conclusion, mounting a surge protector beneath your desk is a great way to help protect your electronic devices from electrical surges, as well as keep cords and cables out of sight. It can be done with simple tools and materials that you likely have on hand already.

You will need some basic safety precautions such as gloves, eye protection, and the appropriate drill bit or saw blade.

Once your surge protector is mounted, you can enjoy the peace of mind that comes with knowing that your electronic devices are safe from surges and power fluctuations. I hope this article has been beneficial for learning how to mount surge protector under desk. Make Sure the precautionary measures are followed chronologically. 

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment