How to Fix Bent Recliner Mechanism

Are you tired of struggling to get your recliner to stay in its original position? Don’t worry- we’ve got you covered. Here is how to fix a bent recliner mechanism.

How to Fix Bent Recliner Mechanism

If you’ve ever wanted to relax in a comfortable and inviting living room while being surrounded by beautiful, stylish furniture that could easily match any modern décor, then having a recliner is an essential element. 

A good quality recliner provides maximum relaxation combined with its aesthetic beauty, creating the perfect seating addition for your favorite chair or sofa.

However, even the best recliners are prone to certain mechanical problems, such as mechanism bending due to frequent use or misuse – which can take away from the function and form of your cherished piece. Take heart, though – fixing bent recliner mechanisms isn’t rocket science!

In this blog post, we’ll explore some simple tips on how to fix bent recliner mechanism.

What Will You Need?

To fix a bent recliner mechanism, you’ll need some basic tools and supplies:

  • A Phillips-head screwdriver
  • A flat-head screwdriver
  • Adjustable pliers
  • Recliner mechanism replacement parts (if necessary)

Once you have all the necessary tools, it’s time to get started.

10 Easy Steps on How to Fix Bent Recliner Mechanism

Step 1: Check for Loose Bolts

To Check the Bolts

The first step is to check the bolts that attach the recliner mechanism to the frame of your chair. Make sure they are not loose; if necessary, tighten them using a Phillips-head screwdriver. You can also use a flat-head screwdriver to remove any bolts that are sticking out.

Step 2: Check for Bent Parts

Next, inspect the entire mechanism and look for any bent parts. Pay close attention to how it should fit together, as this will help you better understand how it works and how to fix it. If you find any warped or bent parts, use adjustable pliers to slowly bend them back into shape until correctly aligned with the other pieces.

Step 3: Test the Recliner Mechanism

Once all pieces are correctly aligned, test out how well your recliner mechanism works by opening and closing it several times. If the motion is still too difficult or stiff, you may need to replace some parts. Don’t worry, though; replacing a recliner mechanism is easy!

Step 4: Replace Recliner Parts (if necessary)

If, after checking for bent pieces and tightening all bolts the recliner still does not move correctly, then it’s possible that the internal mechanisms are worn out or faulty. In this case, you’ll need to replace them with new ones. Just make sure they match your existing recliner parts.

Step 5: Tighten All Bolts Again

Using a Phillips Head Screwdriver

Now that you’ve replaced any worn-out parts and checked how well your recliner moves, tighten all bolts again using a Phillips-head screwdriver to make sure everything is securely fastened. Additionally, check how the parts fit together and make any necessary adjustments. Don’t forget to test how your recliner mechanism works.

Step 6: Check for Wobbling Parts

Once all bolts are tightened, check again for any wobbling parts. If there’s still any play in the mechanism, use adjustable pliers to bend the pieces so that they fit firmly together without any movement or gap. Make sure the mechanism is correctly aligned and moves smoothly.

Step 7: Reattach the Cover and Cushions

Now it’s time to reattach the cover and cushions of your recliner, making sure they fit snuggly over the frame and mechanism. Use a Phillips-head screwdriver to attach the screws in the necessary places. Be careful not to over-tighten them, as this may damage the parts.

Step 8: Test the Mechanism Again

Once everything is put back together, test how well your recliner works by opening and closing it a couple of times. Make sure the motion is smooth and even. It is important that all bolts are properly tightened to avoid any problems with how the recliner functions.

Step 9: Align Recliner in Place

If all goes well, align your recliner back into place and make sure it sits evenly on the floor or platform. This will help to prevent any future misalignments or wobbling. Moreover, it will ensure that everything is operating as it should.

Step 10: Adjust the Back and Footrest

Finally, adjust the back of your recliner to your desired level as well as the footrest, for extra comfort. You can get creative with your recliner’s look by experimenting with different angles or heights. Try moving it around the room until you feel satisfied with how it’s positioned.

We hope this guide was helpful in fixing the bent recliner mechanism. If you’re still having any issues or anything does not feel right, it’s best to call a professional for help to be safe! Be sure to take good care of all furniture pieces so that they can last you many years and provide you with maximum comfort.

5 Additional Tips and Tricks

Consider Replacing Broken Parts
  1. Make sure to check the springs and brackets of your recliner. If bent, you can use a hammer or pliers to straighten them out gently.
  2. If the recliner is stuck in a bent position, you can try putting your weight on it to push it back into place.
  3. If the recliner is still stuck, you may need to take it apart and examine the mechanisms inside. This can be tricky, so enlist help from an experienced handyman if needed.
  4. You can also try lubricating the joints and screws of your recliner with WD-40 or other lubricant products to help reduce friction and make them easier to move.
  5. Finally, if all else fails, consider replacing broken parts or investing in a new recliner altogether. Don’t forget to dispose of your old ones properly!

With these tips and tricks in mind, you’ll be able to how to fix the bent recliner mechanism quickly and easily!

5 Things You Should Avoid

  1. Don’t use inappropriate tools when trying to fix a bent recliner mechanism. The wrong kind of tool can damage the chair and make it even worse than how it was before.
  2. Avoid attempting to force the bent piece back into its original shape without first assessing how severe the bending is. You don’t want to cause further damage to the recliner by attempting a repair that may not be successful.
  3. Don’t try to cut or shape parts of the recliner mechanism unless you are certain that it would help correct how bent it has become. This could make things much worse for your chair and void any warranty on it if there is one in place.
  4. Disassembling the recliner chair without the proper instructions can be disastrous. Not only will it create a bigger problem, but you could also end up voiding your warranty if there is one.
  5. Never try to fix a bent recliner mechanism without first consulting with an expert or following appropriate guides that are available online. This is a complex repair and should not be attempted by an amateur as it could easily cause more damage than good. It’s best to leave it up to professionals who know how to handle this type of situation properly.
Can Damage the Chair

Follow these tips, and you should be able to successfully fix how bent your recliner has become and get back to relaxing in comfort again!

Why is Your Recliner Not Working?

If your recliner is not working, the first step is to identify what the problem may be. It could be due to an obstruction in the mechanism, such as debris or a bent part.

If this is the case, then you’ll need to fix how bent your recliner has become and clear any obstructions before it can start working again. Alternatively, it could be caused by a lack of maintenance over time. Make sure to lubricate all moving parts regularly and replace broken pieces when necessary to keep everything running smoothly.

Finally, if none of these steps help, you may need to call a professional for assistance! They will be able to take a closer look at the issue and determine how best to proceed with fixing your recliner. Taking the time to assess how bent your recliner properly has become and using the right tools can help you fix it quickly and easily!


Repairing a recliner chair with a bent mechanism can seem daunting, but with the right tools and a bit of knowledge, it can be done. In fact, if you know what you’re doing, this repair job could be the perfect weekend project to spruce up your living room. There are other issues that may arise with a recliner chair too.

If the functioning seems odd – jerking, stopping prematurely, etc., then it’s probably time to get it serviced professionally. 

Or if you have any uncertainty about attempting to do this DIY repair yourself, then calling in a professional should be your first thought! Lastly, for all those flip back relaxers out there – remember that preventive maintenance is key to prolonging their life and keeping them functioning properly.

Hopefully, the article on how to fix bent recliner mechanism has been helpful in giving you the confidence to tackle this repair job yourself. Good luck, and have fun!

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment