How to Dissemble Ikea Malm Bed

Knowing how to dissemble an Ikea Malm bed can be beneficial for many reasons. Whether you need to move the bed to another room, store it somewhere temporarily, or replace damaged pieces, being able to disassemble and re-assemble the bed properly is essential in ensuring its longevity.

How to Dissemble Ikea Malm Bed

Additionally, it will save time and effort if you ever need to pack it away in the future. One of the primary advantages of dissembling an Ikea Malm bed is that it can make moving and transporting the bed much easier. Since the bed is already broken down into its component pieces, it will be much lighter, making it easier to move around in tight spaces or up and down stairs.

Additionally, since many parts like mattresses, slats, and guard rails are separate pieces, they can be transported individually in a vehicle. You can find step-by-step instructions on how to dissemble ikea malm bed in this blog article.

Tools You Will Need

  • Phillips head screwdriver
  • Wrench (optional)
  • Rubber mallet
  • Hammer
  • Pliers
  • Utility knife
  • Tape measure
  • Safety glasses
  • Work gloves
  • Step stool or ladder (optional).

Step-by-step Instructions for How to Dissemble Ikea Malm Bed

Step 1: Inspect the Bed Frame

Before disassembling the Ikea Malm bed frame, you should take a look at its construction. Ensure all the parts are in good condition and don’t have any signs of damage or wear. Check for loose screws or bolts and tighten them if needed.

Step 2: Remove the Slats

The slats of the Ikea Malm bed frame are what support the mattress. To remove them, you should grab one end of a slat and slowly pull it out of its grooves. Once all of the slats have been removed, they can be stacked together in a corner or placed in their original packaging for safe storage.

Ikea Malm Bed Frame

Step 3: Take Apart the Side Rails

The side rails of the bed frame are what keep it stable. To disassemble them, unscrew the bolts at each end and carefully pull apart the two ends of each rail. The headboard and footboard are connected to the bed frame with screws. Carefully unscrew each one and then lift off the pieces from the frame.

Step 4: Remove the Bed Legs

The legs of the Ikea Malm bed are easily removed by unscrewing the nuts and bolts at the bottom of each leg. Once all the legs have been removed, you should stack them together or place them in their original packaging for safe storage. The mattress is held up with a support board that is screwed into the bed frame.

To remove this board, unscrew the screws that are holding it in place and then lift off the board from the frame.

Step 5: Remove any Other Parts

If any other parts are attached to the bed frame, such as drawers or shelves, you should remove them by unscrewing all of the screws and bolts. When all the parts have been removed, you should separate the bed frame into two halves. To do this, unscrew the bolts that are connecting the two pieces and then carefully pull them apart.

Separate the Bed Frame

Step 6: Clean Up

Once everything has been disassembled, make sure to clean up any dust or debris that has accumulated on the bed frame. Now that you have taken apart your Ikea Malm bed, you can either store away all the pieces or reassemble them in a new way.

If you choose to store away the pieces, make sure to label each bag or box so that you know where everything goes when it comes time to reassemble the bed.

By following these steps, you should have no trouble disassembling your Ikea Malm bed frame. Once all of the pieces have been taken apart and stored away, you can either decide to reassemble them in another way or keep them stored away until you need them again.

Safety Tips for How to Dissemble Ikea Malm Bed

  1. Wear protective clothing, such as gloves and goggles, to protect yourself from loose screws, wood splinters, and sharp metal edges.
  2. Make sure you have all the necessary tools for the job – a screwdriver, a wrench or an Allen key may be required depending on which model of Malm bed you are disassembling.
  3. Gather the parts you need to dissemble it, and lay them out in an easily visible area so that you do not forget any essential pieces.
  4. Unscrew all of the screws holding the bed together. Keep these separately from each other and place them in a container or bag for safe storage until re-assembly is required.
  5. Use caution when handling and removing the wooden slats that form the base of the bed – they may be heavy and awkward to maneuver out of their slots.
  6. Make sure you can clearly identify all parts before taking them apart, as re-assembly will be much more difficult if parts are not matched up correctly.
  7. Label all of the parts clearly to make re-assembly easier and ensure that a mistake is not made in incorrect pieces being put back together. This will also help if you ever need to move the bed somewhere else.

Following these safety tips will make disassembling an Ikea Malm bed much easier and safer. It is important to remember that it may take multiple attempts or even help from a friend to get the bed apart correctly.

How Should You Store the Components of a Malm Bed for Future Use? 

Once you have dissembled your Ikea Malm Bed, it is important to store the components in a safe and secure place for future use. Here are some tips for storing the components:

  • Make sure that each part is clean and dry before being stored away. This will help prevent any rusting of metal pieces.
  • Label each part, so you know which piece is which when it comes time to reassemble the bed.
  • Store the components in a safe and secure area, free from moisture and pests. Consider using plastic bins or containers with lids to ensure that they stay clean and dry.
  • If you have the original packaging for the bed, place the components back in their original boxes to make them easier to identify later.

By following these tips, you can ensure that the components of your Ikea Malm Bed stay safe and secure until it’s time to assemble again.

How Should You Clean or Maintain the Malm Bed Frame Components? 

Use a Vacuum Cleaner to Remove Any Dirt
  • Dust the bed frame components with a damp cloth. Make sure you wipe down all surfaces and crevices, especially on the headboard, footboard, slats, and side rails.
  • Use a vacuum cleaner to remove any dirt or dust that remains in hard-to-reach places. Be careful not to scratch the surfaces of the components.
  • If the bed frame components are stained, you can use a mild soap and water solution to clean them. Do not saturate the wood with this solution, as it may cause damage.
  • Allow all of the components to air-dry completely before reassembling your Malm bed frame.
  • It is also a good idea to apply furniture polish or wood conditioner once they are fully dry. This will help keep the components looking new and prevent them from becoming scratched or damaged over time.

By following these steps, you can ensure your Malm bed frame stays in great shape for years.

How Can You Prevent Damage to Your Wall or Floor When Dissembling the Bed Frame? 

  • Before beginning the disassembly process, use masking tape or painter’s tape to protect your walls and floor from scratches. Place a length of tape on each wall around the bed frame and in the area surrounding the frame on the floor.
  • Use an electric screwdriver with an appropriate tip to remove the screws from the bed frame quickly and easily.
  • When removing each piece of the bed frame, carefully slide it away from the wall to avoid any damage. To get a better grip on slippery surfaces, use rubber gloves.
  • Separate all of the pieces into different piles so that they can be reassembled easily and quickly when you are done.
  • Once all of the pieces have been disassembled, place them in a safe and secure spot where they can remain until it is time to reassemble the bed frame.
Use Rubber Gloves to Get a Better Grip

Following these steps will help ensure that your walls and floors remain unscathed during the process of disassembling your Ikea Malm bed frame.


In conclusion, dissembling an Ikea Malm bed is not a difficult thing to do. With the right tools and instructions, you can quickly break down and move your bed in no time. Start by taking out all screws, bolts, nuts, and other fasteners holding the frame together. Then take off the legs of each side and the center frame.

If your bed has a slatted base, you will need to remove the center boards and the headboard before you can fully disassemble the bed frame. I hope this article has been beneficial for learning how to dissemble ikea malm bed. Make Sure the precautionary measures are followed chronologically. 

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment