If you’re trying to move your Friheten sofa bed from one side of the room to another, then you know it takes a lot of elbow grease. Every item in Ikea’s iconic collection is designed for maximum convenience and mobility, but when it comes time to actually disassemble an individual piece – even something as simple as a Friheten sofa bed – things can get really tricky quickly.
Avoid arm fatigue and moving soreness by learning how to take down your Friheten quickly and without making too much of a mess. In this post, we’ll offer some detailed instructions on how to disassemble ikea friheten sofa bed with relative ease!
What Is the Hardest Piece of Ikea Furniture to Assemble?
The hardest piece of Ikea furniture to assemble is the Friheten sofa bed. This large and complex piece contains a significant number of components that need to be taken apart and put back together in order for it to be moved from one place to another. It also requires a great deal of strength and patience, as some parts can be particularly difficult to remove. Additionally, there are many sharp edges, so you must be extra careful when dealing with the Friheten.
10 Methods How to Disassemble IKEA Friheten Sofa Bed
1. Remove the Cushions
The first step in disassembling your Ikea Friheten sofa bed is to remove the cushions. There are typically four cushions that make up the main body of the sofa. These can be removed by simply lifting them up and off of the sofa. If the cushions are attached with Velcro, then you will need to use a flathead screwdriver to carefully pry them away. However, it is important to be careful when doing this so that you don’t damage the sofa. Make sure to keep the screws and other small parts in a safe place so that you don’t lose them.
2. Fold Down the Backrest
Once the cushions have been removed, you can then begin to fold down the backrest of the sofa. This is done by pulling on the fabric tab that is located at the top of the backrest, near where the cushions are attached. Once you have pulled on this tab, the backrest will begin to fold down. Continue folding until it is completely flat. If the backrest has a footrest, you can also fold this down to make the sofa even flatter. Once all of the parts are folded down, you can then move the sofa to its final destination.
3. Remove the Sofa Bed Mechanism
The next step is to remove the sofa bed mechanism from inside the sofa. This can be done by unscrewing the two bolts that are located at either end of the mechanism. Once these bolts have been removed, you can then lift out the entire mechanism and set it aside. If you find that the bolts are difficult to remove, you may need to use a wrench or pliers to help loosen them. Once the mechanism has been removed, you can then move on to the next step. Try to keep the mechanism in a safe place, as you may need to reattach it later.
4. Unscrew the Legs
You Can Check It Out to Attach a Headboard to a Dorm Beds
Once the sofa bed mechanism has been removed, you will need to unscrew and remove the legs of the sofa. There are typically four legs, two located at each end of the sofa. These can be unscrewed using a Phillips head screwdriver. If the legs are attached to the frame with bolts, you will need to use a wrench or adjustable pliers to remove them.
Once the legs have been removed, you will be ready to replace the sofa bed mechanism. However, if the legs are attached to the frame with screws, you may need to use a drill and bit set to remove them. Be sure to save the hardware for reattachment once you have replaced the sofa bed mechanism.
5. Remove any Remaining Hardware
Once all of the legs have been removed, you should then check for any remaining hardware that needs to be removed from inside the sofa frame. This could include screws or brackets that were used to attach the various components of the sofa together. If any hardware is found, it can be removed using a screwdriver or pliers.
While it is important to be careful, you should not be afraid to apply some force if the hardware does not come off easily. Once all of the hardware has been removed, it can be discarded or saved for future use. Finally, the sofa should be wiped down to remove any dirt and dust that may have accumulated. Your sofa is now ready to be reassembled or used as-is!
6. Separate the Frame into Two Pieces
The next step is to separate the frame of the sofa into two pieces. This can be done by removing any screws or nails that are holding the two halves of the frame together. Once all of these fasteners have been removed, you can then begin to pull apart the two halves of the frame.
Depending on the type of frame you choose, there may be a few more steps to take in order to properly separate the two halves. For example, if you have chosen a wooden frame, you may need to use a saw to cut through any glue or nails that are holding the pieces together.
7. Remove the Mattress Support Slats
Once the frame has been separated into two pieces, you will need to remove the mattress support slats from inside each half of the frame. These slats are typically held in place by screws or nails, which can be removed using a screwdriver or pliers. Once the slats have been removed, set them aside for later use or disposal, if they are in good condition, they can be reused with a new frame
. Although it may be tempting to discard them, they are an important part of the frame’s structure and should not be neglected. Make sure that all of the screws and nails have been removed before proceeding.
8. Separate the Frame Rails
The frame rails are the two support rails that run along the bottom of the frame. They act as a backbone for the entire structure and need to be disconnected in order to separate the frame from the rest of the bike. Use a wrench to loosen and remove the bolts that attach them to the frame. Gently pull each rail away from the frame and set them aside.
9. Clean and Sand the Wood
With the mattress support slats removed, it’s time to clean and sand the wood. Use a damp cloth to remove any dust or dirt, then use medium-grit sandpaper to smooth out any rough spots. When you’re finished, use a vacuum to remove the resulting dust and debris.
To finish the job, apply an even coat of wood stain or paint to give your bed frame a polished look. If you’re using paint, make sure you apply a clear coat of protective finish to ensure the longevity of your bed frame.
10. Dispose of the Frame
With the frame properly labeled, it is now time to get rid of it. Take the frame apart and dispose of the individual pieces in a responsible manner. Depending on the type of frame, this could mean taking it to a recycling center or donating it to charity.
Make sure that you are following any local regulations regarding disposal, and check with your city or county government for more information. If disposed of properly, the frame can be reused in another project and help reduce the amount of waste in the environment. After all, recycling is always a great way to help conserve natural resources and reduce our impact on the environment. Thank you for taking the time to properly dispose of your frame!
Things to Consider When Diassemnling IKEA Friheten Sofa Bed:
1. Read through the Product Manual Carefully:
Make sure you understand exactly how to put your IKEA Friheten Sofa Bed together before attempting to do so. Read through the product manual that comes with it and takes note of all instructions, tips, and warnings.
2. Set Aside a Large Enough Area:
You’ll need a lot of space in order to disassemble your IKEA Friheten Sofa Bed. When working in confined spaces, you’re likely to become frustrated and make mistakes. So, take the time to find a large enough area where you can comfortably fit the sofa bed and all of its components.
3. Gather Necessary Tools:
Before beginning, gather all of the necessary tools for disassemblies, such as a Phillips screwdriver, hex key, and adjustable wrench. Familiarize yourself with how these tools work and make sure they’re in good condition.
Conclusion
Although the Ikea Friheten sofa bed is a great piece of furniture, it can be difficult to disassemble. However, by following these simple steps on how to disassemble ikea friheten sofa bed, you should be able to take it apart with no problem.
Remember to be careful when handling the parts and to put everything back in its proper place so that you can reassemble the sofa bed quickly and easily. With a little patience and attention to detail, you’ll have your sofa bed taken apart in no time!
You Can Check It Out To Remove RV Jack Knife Sofa
