How to Disassemble Graco Pack N Play With Changing Table

If you have a Graco Pack-N-Play with changing tables, you may need to disassemble the unit at some point. This could be because you are moving and need to transport the playard or if you just want to store it away for future use.

How to Disassemble Graco Pack N Play With Changing Table

Fortunately, disassembling your Graco playard is easy and can be done in just a few steps. Knowing how to disassemble your Pack N Play with changing table will ensure that it is properly stored and set up for future use.

The major advantage of disassembling a Graco Pack n Play with Changing Table is the ease of use and portability. The playard can be folded up quickly and stored away or taken on trips when needed, making it an ideal choice for families who travel often.

Additionally, the changing table portion makes it easy to switch diapers without taking the baby out of the playard. In this blog post, You will learn in detail how to disassemble graco pack n play with changing table.

Tools You Will Need

  • Phillips head screwdriver
  • Flathead screwdriver
  • Diagonal cutting pliers
  • Needle nose pliers
  • Wire cutters/strippers
  • Adjustable wrench or spanner
  • Safety goggles
  • Tape measurer
  • Hammer and punch set
  • Knife
  • Torx driver
  • Allen key or hex wrench set

Step by Step Processes for How to Disassemble Graco Pack N Play With Changing Table

Step 1: Inspect the Pack n Play

Make sure all pieces are present and accounted for before you attempt to disassemble it. All the original components should be there, including the frame, mattress, bassinet/changing table attachments, and any additional toys or compartments that were included with your Pack n Play model.

Step 2: Begin Disassembly

Start by loosening the screws on the top portion of the Pack N Play. Make sure all screws are completely removed before attempting to take them apart any further. After you have removed all screws, carefully remove the upper frame from your Pack n Play. This should be done slowly and with care to avoid damaging any part of it.

Start by Loosening the Screws

Step 3: Remove the Bassinet/Changing Table Attachment

This can be easily removed by unscrewing four screws that attach it to the main frame of your Pack n Play. Make sure each screw is completely removed before you attempt to remove this piece. Gently lift the mattress out of the frame and set it aside. This will help you get to the bottom portion of your Pack n Play more easily.

Step 4: Unscrew the Lower Frame

There may be one or two screws that are holding this part together; remove these before attempting to lift off the lower portion of your Pack-n-Play. Once all screws are removed, you can carefully lift off the lower portion of your Pack n-Play. This should be done slowly and with caution to ensure that no damage is done to any part of the Pack n Play.

Step 5: Separate the Pieces

Once the lower portion of your Pack n Play has been removed, carefully separate all pieces and set aside. This includes any toys or compartments that may have been attached to it. To reassemble your Pack n Play, simply follow the instructions in reverse order. Start with the lower portion of the frame and move up, reattaching all pieces in their exact place.

Step 6: Double-Check

Once you have finished reassembling your Pack n Play, make sure to double-check that all screws are tight and secure before using it. This will ensure the safety of your child as they use this product.

With these steps, you can safely and easily disassemble your Graco Pack N Play with Changing Table. Always use caution when taking apart pieces of equipment and refer to the manufacturer’s instructions when in doubt.

Precautions for How to Disassemble Graco Pack N Play With Changing Table

  1. Carefully read the instructions manual before disassembling a Graco Pack N Play with changing table. Pay close attention to any safety warnings or cautions listed.
  2. Ensure your workspace is clutter-free and on an even, stable surface, such as a flat floor or large tabletop. This will ensure that the pieces of the Pack N Play are not accidentally knocked over and damaged.
  3. Wear protective gloves when handling sharp objects such as screws, nuts, and bolts to avoid injury from accidental cuts or scrapes.
  4. Make sure all parts are properly secured before attempting to disassemble. Loose items can become hazardous when being moved.
  5. Make sure all components are in good condition before attempting to disassemble. If any parts appear worn or damaged, replace them before disassembly.
  6. Use a screwdriver and wrench (or other appropriate tools) when necessary to avoid stripping screws or damaging other components of the Pack-N-Play.
  7. Finally, always seek the assistance of a knowledgeable friend or family member when attempting to disassemble a Graco Pack-N-Play with changing table.
Use a Screwdriver and Wrench

Having an extra set of eyes can help you identify any potential safety issues and ensure that all components are properly secured during the process.

How Should You Store Your Graco Pack N Play With Changing Table Once It Has Been Broken Down? 

Once your Graco Pack N Play with changing table has been disassembled, you must store it safely and securely. First, it is important to find a space that can comfortably fit the pieces of the play yard. When storing the play yard, ensure all parts are kept in one place so they don’t get lost or separated.

It is also important to ensure that the pieces are kept away from any water or moisture so as not to damage them. You should also ensure that pieces of the changing table and play yard are not stacked on top of each other, as this can cause pressure points that may warp over time.

How Long Should It Take Me to Disassemble Your Graco Pack N Play With Changing Table? 

The amount of time it takes to disassemble your Graco Pack N Play with Changing Table depends on the model and your personal experience level. The general process should take about 15-20 minutes, although it could take longer if you are not familiar with assembling or disassembling furniture.

A Phillips-head screwdriver, a flat-head screwdriver, and needle nose pliers. Next, use the Phillips-head screwdriver to remove any screws from the top of the changing table. Once those are removed, you can then pull apart the two sides of the table–the left side will lift off along with the changing pad bracket.

Use the Phillips-head Screwdriver

Next, use the Phillips-head screwdriver to remove any screws from the bottom of the Pack N-Play frame. Then, use a flat-head screwdriver or needle nose pliers to remove any plastic clamps that may secure further parts of the Pack-N-Play together.

Once all screws and clamps have been removed, the Pack N Play should separate into two parts. The top will contain the changing table, and the bottom will be the actual Pack-N-Play frame.

Will You Need Help From Someone Else to Successfully Disassemble the Pack N Play With Changing Table? 

No, you should be able to do this disassembly process independently without help from someone else. However, if you feel like you need help or have trouble with a certain step, it is best to have someone else assist you.

The best way to begin the dissembling process is first to remove the changing table from the Pack N Play. This can be done by gently lifting or pulling up on the changing table to release it from its clips at the base of the Pack-N-Play.

Once removed, set aside for later use if needed. Next, you will want to remove all the components stored within the Pack N Play. To do this, locate and remove any screws or bolts that may hold the components in place, such as the bassinet, side rails, and other pieces. Carefully put aside these parts and keep track of where each goes for easy reassembly later on.

Remove All the Components Stored Within the Pack N Play


In conclusion, disassembling a Graco Pack n Play with Changing Table is not as difficult as it may seem. With some patience and the right tools, it can be done in just a few simple steps. First, start by removing all the fabric pieces from the playard. Next, unscrew any screws that secure the changing table to the unit.

Finally, pull the pins that connect the base of the changing table to the Pack n Play frame. Following these steps will help you successfully disassemble your Graco Pack n Play with Changing Table in no time.

I hope reading this post has helped you learn how to disassemble graco pack n play with changing table. Make sure the safety precautions are carried out in the order listed.

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment