There are many reasons why you might want to disassemble your Aeron chair. First and foremost, it may be necessary when moving or transporting the chair to fit the piece through doorways, stairwells, and other tight areas.
Additionally, you can use this opportunity to inspect thoroughly, clean, and lubricate different chair components. Disassembling the chair can also provide an opportunity to make necessary repairs.
The advantages of how disassembling an Aeron chair can be significant, especially if you plan on moving or transporting the chair. Disassembling your Aeron chair allows you to easily store it in smaller spaces and move it around with minimal effort.
Having the ability to disassemble your Aeron will also make repairs easier, since you can access all the chair components quickly and easily. You can find step-by-step instructions on how to disassemble aeron chair in this blog article.
Tools You Will Need
- Flathead screwdriver
- Phillips head screwdriver
- Hex key set
- Locking pliers
- Utility knife
- Measuring tape
- Hammer or mallet
- Flashlight (optional)
Step-by-step Instructions for How to Disassemble Aeron Chair
Step 1: Inspect the Chair
Carefully inspect the chair for any hardware or parts that could potentially be removed. Unscrew the seat padding to get access to the frame underneath. You may need to use a Phillips head screwdriver for this step.
Step 2: Remove the Armrests
Pull off the armrests from their respective posts on either side of the chair. You may need to use a flathead screwdriver for this step. Separate the frame into two sections and unscrew all of the parts that hold the frame together. Again, you may need to use a Phillips or flathead screwdriver for this step.
Step 3: Remove Caster Wheels
Remove the caster wheels from their respective posts on the bottom of the chair. You may need to use a wrench for this step. Disconnect the gas cylinder from the seat base by unscrewing the apparatus at the bottom of the chair. You may need to use a Phillips head screwdriver for this step.
Step 4: Detach Seat Fabric
Detach the fabric coverings on both sides of the seat and back of the chair. You may need to use a flathead screwdriver for this step. Remove all nuts and bolts on the chair frame from their respective areas. Again, you may need to use a Phillips or flathead screwdriver for this step.
Step 5: Unscrew Plastic Washers
Unscrew the plastic washers that are holding the fabric in place and remove them from the chair frame. Again, you may need to use a Phillips or flathead screwdriver for this step. Disconnect the seat base from the chair frame. You may need to use a Phillips head screwdriver for this step.
Step 6: Remove the Chair Frame
Carefully lift up and remove the chair frame from its original position. You may need to use a flathead screwdriver for this step. Once you have followed these steps, your Aeron Chair will be completely disassembled and ready for transport or storage. Ensure all the parts are accounted for so you can easily reassemble the chair when needed.
By following this guide to Disassemble Aeron Chair, you should now have a fully dismantled chair and be able to move or store it easily.
Tips for How to Disassemble Aeron Chair
- An Aeron Chair requires special drivers and bits to disassemble properly, so ensure you have the correct tools for the job.
- Before attempting to disassemble an Aeron Chair, disconnect any power cables from the chair’s base and armrests.
- Carefully peel away any fabric or vinyl coverings on the chair and set them aside for later use.
- Use a socket wrench to remove all of the nuts and bolts that secure components together, such as armrests, the base, and the backrest.
- As you disassemble the chair, place all of its components in designated areas so that nothing gets misplaced or damaged during the process.
- Whenever possible, wear safety goggles, gloves, and other protective gear to ensure that you don’t injure yourself while disassembling the chair. This is especially important if you are using sharp tools or heavy machinery.
Following these tips will help ensure a successful disassembly of your Aeron Chair and prevent any unnecessary damage or injury. Once all of the components have been removed, store them in a safe, dry place until you are ready to reassemble your chair.
How Do You Avoid Damage to the Chair While Disassembling It?
- The first step in avoiding damage to the Aeron chair while disassembling it is to take off any cushions or pads that may be attached. These can easily be removed by unclasping any clasps and unhooking them from the back of the chair.
- Once all cushions have been removed, it is important to make sure all bolts are securely tightened to prevent any parts from becoming loose or slipping out.
- When unscrewing the bolts, it is important to use a screwdriver that fits snugly into the head of the bolt and turn it counterclockwise until they are removed. It is not recommended to use a power tool as this could potentially cause damage to the chair.
- Once all bolts have been removed, inspect the parts and make sure all screws have been accounted for. It is important to keep track of which screw goes where so that it can be reassembled correctly.
- Carefully lift each part off of the chair and set it aside. Make sure to use two hands when lifting heavier parts so as not to cause strain on your back.
- Finally, check all parts for any damage that may have occurred during disassembly and note where repairs or replacements should be made before reassembling the chair.
By following these steps, disassembling your Aeron chair should be smooth. Taking precautions to avoid any potential damage will ensure that your chair remains in great condition for years to come.
How Can You Prevent Scratches on the Upholstery While Disassembling an Aeron Chair?
When it comes to disassembling an Aeron chair, the key is to work slowly and carefully. It’s important that all parts are removed in the correct order before being put back together – otherwise, you may end up damaging something. To ensure that no scratches occur on the upholstery while you’re removing components, follow these guidelines:
- Use the Right Tools: Before beginning, ensure you have the appropriate hardware, such as a screwdriver and wrench. This will help you avoid using excessive force on any component of your chair.
- Take Pictures While Disassembling: Taking photos throughout the process can be helpful in ensuring that you put everything back in the correct order.
- Use Protective Padding When Necessary: If any components are difficult to remove, use a soft cloth or towel as padding between your tools and the chair’s surface for extra protection.
- Reassemble With Care When putting your Aeron chair back together, be sure to tighten any screws firmly – but not too tightly. Doing so can help you avoid scratching or denting the upholstery.
Following these steps, you can efficiently disassemble your Aeron chair without damaging its parts. With a little bit of patience and care, your chair will remain in pristine condition for many years to come.
What Kind of Maintenance Should You Perform on a Regular Basis for Your Aeron Chair?
- Vacuum or dust the seat, backrest, and armrests of your Aeron Chair every week to prevent dirt build-up.
- Check for any loose screws on a monthly basis and tighten them if necessary.
- Inspect all moving parts of the chair – such as casters, armrests, and levers – for any signs of wear. Contact an authorized service provider for replacement parts if there is any visible damage.
- Check the tension knob periodically to ensure that it is still in proper working order, and adjust it if necessary.
- Use a damp cloth to clean the upholstery and frame of your Aeron Chair at least once a month.
- If your chair has lumbar support, inspect it for any signs of wear and tear and replace it if necessary.
- Finally, to ensure that your Aeron Chair lasts for many years to come, disassemble the chair regularly and lubricate all moving parts with WD-40 or silicone oil. This will help to keep the chair functioning properly and also prolong its lifespan.
It is important to remember that regular maintenance of your Aeron Chair is essential for it to work smoothly and efficiently. Following these steps will ensure that your Aeron Chair remains in optimal condition for many years to come.
One of the biggest disadvantages of disassembling an Aeron chair is that it can be very time-consuming. It consists of several steps and requires considerable skill and knowledge to complete the task properly. Additionally, if any pieces are misaligned or otherwise not correctly assembled during the disassembly process, it could lead to further issues when reassembling the chair. Additionally, it can be difficult to locate replacement parts for Aeron chairs that have been disassembled, so you may find yourself needing to purchase a new one.
At the end of the day, disassembling an Aeron chair is a relatively simple process that anybody with basic knowledge of furniture assembly can accomplish.
Following the steps outlined above should ensure that you can properly and safely disassemble your Aeron chair correctly and efficiently. I hope reading this post has helped you learn how to disassemble aeron chair. Make sure the safety precautions are carried out in the order listed.