How to Disassemble a Storage Bed

A storage bed is a great way to maximize the amount of space you have in your bedroom. It allows you to store extra items, such as blankets and linens, underneath the mattress.

How to Disassemble a Storage Bed

Knowing how to disassemble it is invaluable if you ever need to move your storage bed or replace it with a different one. Disassembling a storage bed is not overly complicated, but it requires time and effort.

The main advantage of disassembling a storage bed is that it allows for easier transport and relocation. By taking apart the bed, you can move all the pieces in your vehicle or on a truck with greater ease than if you were to try to move an entire bed frame.

This also makes it much simpler to store the components when not in use, freeing up much-needed space in your home. You can find step-by-step instructions on how to disassemble a storage bed in this blog article.

Step-by-Step Processes for How to Disassemble a Storage Bed

Step 1: Inspect the Bed

Before beginning, take a close look at the bed and all of its components. Make sure that all parts are present and undamaged before attempting to disassemble. Carefully lift off any mattress or pillow top on the bed to access the underlying frame.

Step 2: Remove the Drawers from the Bed Frame

If your storage bed has drawers, remove each drawer one by one. This should be done carefully to prevent any damage. Many drawers are connected with screws that can be removed with a screwdriver. If there is no visible hardware, gently use a flathead screwdriver to pry open the drawer.

Remove Each Drawer One by One

Step 3: Unscrew the Bed Frame

Once all of the drawers have been removed, unscrew any screws that attach the bed frame to the headboard and footboard. Depending on your bed’s construction, you may need a Phillips head screwdriver or an Allen wrench to remove these screws. If your bed includes bed slats, remove them one by one. Again, be careful to avoid any damage.

Some beds require you to loosen the bolts from the sides and lift up each slat as you go. Others may require that you slide out each slat from the bottom up.

Step 4: Unscrew and Remove the Side Rails

The side rails of your storage bed are likely held in place with screws located at each corner of the frame. Use a screwdriver to remove these screws. Then, gently lift off the side rails from the headboard and footboard.

Once all of the components have been removed, you can take apart the head and footboard. Check for any screws that may be securing them to the frame. If none are found, lift the head and footboard off the frame.

Step 5: Disassemble the Bed Frame

The bed frame is likely held together by screws, bolts, or dowels. Unscrew each of these components and then gently pull apart the bed frame pieces. Most storage beds have a set of mattress support slats that help to keep the mattress in place. Carefully unscrew or pry apart these slats from each other.

Pull Apart the Bed Frame Pieces

Step 6: Remove the Mattress and Box Spring

Once all of the other components have been removed, you can lift off the mattress and box spring. If your bed has a pillow top or topper, this should also be lifted off. When everything has been taken apart, store all of the components in a safe place for reassembly.

Label the components so that you know which parts go together, and keep all the screws, bolts, and dowels in one place.

Tips for How to Disassemble a Storage Bed

  1. Ensure you have the right tools for disassembling your storage bed, such as a Phillips head screwdriver and an adjustable wrench.
  2. Make sure to work in a well-lit area, preferably with good ventilation.
  3. Place protective padding or a cardboard sheet on the floor to ensure you don’t scratch the flooring or other items in the room.
  4. Wear protective goggles, gloves, and clothing to protect yourself from sharp edges or flying debris.
  5. Carefully inspect all parts of the storage bed before attempting to disassemble it. Make sure all screws are removed and nothing is broken.
  6. If there are any bolts or nuts that you can’t get loose, use a lubricant such as WD-40 to help loosen them.
  7. As you disassemble the bed, keep track of all pieces and place them in labeled plastic bags for easy storage and reassembly later.
  8. Have a friend or family member help you with the job’s more difficult and dangerous parts, like moving the mattress and box spring. Having another set of hands to help can prevent injuries, damage, and frustration.
Use a Lubricant Such as Wd-40

Following these tips will make Disassemble a Storage Bed easier and safer. Be sure to take your time and follow all safety precautions so that the job can be completed quickly, safely, and correctly.

How Often Should You Inspect Your Storage Bed for Signs of Wear and Tear? 

Storage beds are an excellent way to maximize space while still getting the added benefit of storage. But, like any piece of furniture, they can become worn over time and may need to be replaced or repaired. To ensure your storage bed stays as sturdy and safe as possible, it’s important to inspect it regularly for signs of wear and tear.

Inspecting your storage bed should be done at least once every six months. If you notice any signs of wear or damage, like cracks in the wood, loose screws, or a wobbly frame, it’s important to address these issues immediately. This will help prevent further damage and keep your storage bed safe and functioning as intended.

Are There Any Special Techniques That Can Help You Complete the Disassembly Faster? 

Yes, there are a few techniques that can help make the disassembly of your storage bed faster and easier.

  • The first step is to make sure all items stored in the drawers or cabinets are removed before beginning the process. This will make it much easier to lift and maneuver the pieces as you work.
  • The second step is to take photographs or a video of the entire bed as it is assembled. This will come in handy if you are unsure about how to put the bed back together after disassembly.
  • Third, it can be helpful to label each piece you remove from the storage bed so that you know where it goes when reassembling. This will save you both time and frustration.

Finally, try to ensure two people are available to carry each piece of the bed as it is disassembled. This will ensure that the pieces are handled safely and that no one gets injured during the process. By using these techniques, you can make the process of disassembling your storage bed much easier and more efficient.

How Should You Clean and Maintain Your Storage Bed to Ensure Its Longevity Over Time? 

After disassembling your storage bed, it’s important to take the necessary steps to clean and maintain it for a longer lifespan. Here are some tips to keep in mind:

  • Clean off any dust or dirt from the surface of your bed frame before storing. This will help prevent any stains or discoloration from forming over time.
  • Inspect the bed frame for any damage or weak points that may need to be repaired before reassembling.
  • If your storage bed contains drawers, take them out and clean each one individually using mild detergent and warm water. Make sure also to wipe down the inside and outside of the drawers.
  • If your bed has metal components, use a soft cloth to wipe them down periodically with an oil-based furniture polish to prevent rusting and corrosion.
  • Make sure to store your bed in a dry area away from moisture when not in use. This will help prevent water damage to the frame or drawers.
Furniture Polish to Prevent Rusting

By following these simple steps, you’ll help ensure your storage bed will continue looking great and last for many years to come.


Disassembling a storage bed can be difficult and time-consuming due to the various pieces that must be taken apart. It also requires careful attention when putting the pieces back together to ensure proper alignment for the frame and drawers.

Additionally, many beds require special tools or techniques to properly disassemble them, which may need to be acquired separately. In conclusion, disassembling a storage bed can be daunting and time-consuming. However, with patience and the right tools, you can easily break down your bed frame to fit in smaller spaces for transport or relocation.

Start by removing the mattress and any additional bedding materials before unscrewing the headboards and side rails from the frame. I hope this article has been beneficial for learning how to disassemble a storage bed. Make Sure the precautionary measures are followed chronologically. 

Photo of author

Adrian Green

Adrian is a woodworking hobbyist and has loved Woodworking since he was 10 years old. Back then in childhood, his father used to have a furniture shop. He used to help his dad and learned a lot from him about how to fix woodworking furniture, basic carpentry knowledge and also about how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others.

Leave a Comment