Have you recently moved into a space with limited square footage and are looking to maximize the amount of living space? One great way to optimize a room is by investing in a metal loft bed. Not only will these beds provide an extra level of sleeping space without taking up too much floor area, but they can also serve as study havens or hangout spots for friends.
But before you begin using your new bed, it’s important to make sure that it has been secured properly so that it won’t fall off the wall while someone is sleeping inside. In this blog post, we’ll give you all the tips and tricks on how to secure a metal loft bed to the wall of your home!
Can a Metal Loft Bed Collapse?
Metal loft beds have become increasingly popular in recent years due to their space-saving design and stylish look. But many people wonder if metal loft beds can collapse. The short answer is yes, metal loft beds can collapse if not properly secured to the wall.
If a metal loft bed is not attached securely to the wall, it could fall over and cause serious injury. To ensure the safety of those who use your metal loft bed, it is important that you properly secure it to the wall.
There are a few different methods for securing a metal loft bed to the wall. The most reliable and recommended method is to use appropriate furniture anchors or brackets that are designed specifically for this purpose. These anchors or brackets help to secure the metal loft bed to the wall in a much stronger way than just screws alone.
It is also important to make sure that the metal loft bed is flat and even ground, as uneven surfaces can cause instability. Additionally, make sure that all of the bolts are tight and check them periodically for any signs of wear or damage.
If you notice any issues, replace the bolts immediately.
By following these steps and using appropriate furniture anchors or brackets, you can help to ensure that your metal loft bed is safely secured to the wall and will not collapse. This will help keep those who use your metal loft bed safe and your space looking great.
10 Methods on How to Secure a Metal Loft Bed to the Wall
1. Use L-Brackets
L-brackets are one of the most effective ways to secure a metal loft bed to the wall. L-brackets are large metal brackets that are placed at the top corners of the bed and screwed into the wall. The brackets should be long enough to provide support for the entire weight of the bed and its occupants.
If the wall is made of drywall, you will need to anchor the screws in a stud behind the wall for extra security. Although L-brackets are inexpensive and easy to install, they may be too bulky for some situations.
2. Use Angle Brackets
Angle brackets are another type of bracket that can be used to secure a metal loft bed to the wall. Angle brackets are smaller than L-brackets and are placed at the top corners of the bed, near the mattress. They are then screwed into the wall.
This provides additional support and stability to the bed. To ensure that the screws are secure, it is important to pre-drill holes in the wall and use wall anchors with the screws. This helps protect the wall from damage, as well as makes sure that the bed is secure to the wall.
3. Use Corner Plates
Corner plates are large metal plates that are placed over the top corners of the bed and screwed into the wall. The plates will provide additional stability and security. If the bed is installed in a drywall wall, use corner plates that are 1/8-inch thick steel or thicker.
Corner plates should have at least four bolt holes and be large enough to cover the entire corner of the bed.
Make sure that the bolts are long enough to go through both the plate and the wall. Use a stud finder to locate any wooden studs in the wall and use those to further secure the bed. If there are no wooden studs, you may need to use wall anchors in order to securely attach the bed.
Be sure to follow the instructions for installing the corner plates and wall anchors carefully in order to ensure that the bed is properly secured.
4. Use T-Plates
T-plates are large metal plates that are placed at the top of the bed frame and screwed into the wall. This method is often used in conjunction with lag bolts. When attaching the T-plate to the wall, make sure it is securely attached, preferably with several screws. Additionally, if the wall is made of drywall or plaster, use wall anchors to ensure it’s secure.
Then attach the T-plate to the top of the bed frame and use lag bolts to secure it. Although this is a strong, sturdy method of securing the bed to the wall, it’s important to check on it regularly to make sure it remains securely in place. However, if done correctly, this is one of the most reliable ways to secure a metal loft bed.
5. Use Crossbars
Crossbars are bars that run across the top of the bed frame and are screwed into the wall. This will provide extra security by holding the bed more firmly to the wall. They should be placed as close together as possible and screwed securely to the wall using lag screws.
Make sure the crossbars are at least two feet in length and that they extend beyond the sides of the bed frame to ensure the greatest possible stability.
If your bed frame is especially tall, you may need to use additional crossbars. Although the extra work may be inconvenient, the additional security will be worth it. Try to make sure that the crossbars are level and parallel, as this will help to ensure a secure fit.
6. Use Straps
Straps can be used to secure a metal loft bed to the wall in addition to or instead of brackets or crossbars. Straps are looped around the bed frame and secured to eyehooks that have been screwed into the wall studs.
The straps should be tightened securely, but not too tightly, to make sure the bed is secure without putting too much stress on the frame. Make sure to check the straps periodically to ensure that they are still secure.
If the straps become loose, simply tighten them up again. If the straps become damaged, replace them with new ones. While straps may not provide as much security as brackets or crossbars, they can still be used to secure the bed if needed.
However, it is best to use more than one form of security for added peace of mind.
7. Use Cables
Cables can also be used to secure a metal loft bed to the wall in addition to or instead of brackets or crossbars. Cables are looped around the bed frame and secured to eyehooks that have been screwed into the wall.
This is a less secure option than the other two methods, but it can be useful in situations where there isn’t enough space between the wall and the bed for brackets or crossbars.
Make sure to use cables that are rated for the weight capacity of your loft bed and secure them tightly to ensure maximum safety. If you need to, you can use bungee cords to secure the cables in place. However, this is not a recommended safety measure and should only be used as a last resort.
8. Use Chains
Chains can also be used to secure a metal loft bed to the wall in addition to or instead of brackets or crossbars. Chains are looped around the bed frame and secured to eyehooks that have been screwed into the wall. The advantage of using chains is that they provide additional stability to the bed and can be adjusted as needed.
However, it is important to make sure that the chains are tight enough to safely secure the bed but not too tight to cause damage. It is also important to make sure that the eyehooks are firmly secured in the wall and are not likely to come loose over time. Using chains is an easy and effective way of securely attaching a metal loft bed to the wall.
9. Use Anchor Plates
Anchor plates are large metal plates that are placed over the bed frame and screwed into the wall. Anchor plates provide extra stability for the bed and can help prevent accidents caused by shifting or tipping. Be sure to use screws that are appropriate for your wall material.
While anchor plates are not necessary for all types of beds, they can provide peace of mind when securing heavier loft beds. Though they may require a bit more time to install, anchor plates are a great way to ensure that your bed stays put.
10. Use Lag Screws
Lag screws are large screws that can be used to secure a metal loft bed to the wall. They should be driven into the frame of the loft bed and then into the wall studs behind it. Be sure to use a drill to pre-drill pilot holes for the lag screws to ensure a secure hold.
Lag screws are strong and can easily support the weight of a loft bed. While this is the most secure option, it may not be an ideal solution for renters as it will leave holes in the wall.
Conclusion
The most important thing to remember when securing a metal loft bed to the wall is to use the right type of hardware. Be sure to consult with an expert or follow the instructions on how to secure a metal loft bed to the wall that comes with your purchase to avoid any accidents.
With a little bit of planning and effort, you can have a safe and stylish metal loft bed that will last for years.
