Have you ever noticed that your beloved couch is beginning to show signs of wear? Time can take its toll on furniture, and it’s not always easy to keep everything looking spick-and-span. A quick and easy way to liven up a tired couch is by putting on a fresh cover with the help of a foam roller.
In this blog post on How to Put on a Couch Cover With Foam Roller, we’ll go through how to properly put on a new cover for your couch in just five easy steps! Not only will this give your living space an updated look, but it will also protect this investment from further deterioration while adding years of extended life. Read on to find out exactly how you can use a foam roller for the job!
Needed Materials
Given below are the required materials for this project:
- New couch cover
- Foam roller
- Tape measure
- Safety pins
Bonus Tips:
- When Shopping for a Couch Cover, Always Measure Your Furniture to Ensure You Get the Right Size.
- If Possible, Try to Position Your Couch in an Area Where It Can Be Easily Accessed and Maneuverable in Order to Put on the Cover Properly.
- An Easy Tip for Ensuring a Snug Fit is to Start With the Back Portion, Then Work Your Way Down Either Side Before Finally Covering the Seat Cushions.
- To Keep the Couch Cover in Place While You Work, Safety Pins Can Be Used to Temporarily Secure It.
- Once Everything is in Place and Looking Good, Use a Foam Roller to Flatten Out Any Wrinkles or Bumps for a Professional Finish.
Now that you know exactly how to put on a new couch cover with the help of a foam roller, you can get started on giving your living space a much-needed makeover! With the right materials and some patience, this project is sure to be a roaring success.
11 Step-by-step Guidelines on How to Put on a Couch Cover With Foam Roller
Step 1: Measure the Size
To make sure you’re getting the right fit for your new couch cover, it’s important to measure the length and width of your couch. This will help to ensure that you select a cover with adequate dimensions for your furniture.
It’s also a good idea to measure the height of your couch as well in order to ensure the cover won’t be too short or too long. This step is essential if you want your cover to fit properly and look its best.
Step 2: Lay out Your Cover
Once you have your measurements, lay out your new cover on a flat surface and make sure that it measures up to what you measured on your couch earlier. This is an important step because it will help to make sure that the cover fits properly when you install it on the couch. However, if you find that the cover is either too big or too small, it’s best to return it for a better size.
Step 3: Place Foam Roller Inside the Cover
Place a foam roller inside your new cover and position it at one end of the couch. This will help to keep the fabric taut and wrinkle-free when you are putting it on. This is especially important if you are putting a cover on a large couch.
If you find that the cover is still too large even after the roller has been placed, you may want to consider using safety pins to help keep it in place. But be sure not to pin it too tightly, as this may damage the fabric.
Step 4: Start Installing the Cover
Start by draping one end of the cover over the couch, beginning with the side where you placed your foam roller. Using your hands, smooth out any wrinkles and make sure that all of the fabric is lying flat against the couch.
You may need to reposition the roller several times in order to keep everything taught. Although this part of the process can be a bit tedious, it’s important that you take your time and make sure everything is properly fitted.
Step 5: Secure the Cover
Once you have one end of the cover in place, begin to secure it by using safety pins. Start at the bottom of the couch and work your way up, attaching pins along the way. Make sure that each pin goes through both layers of fabric so that the cover stays secure.
Otherwise, the cover may start to slip and bunch up in certain spots. This is why it’s important to take your time and make sure that everything is fitted properly. But once you’ve secured the cover with pins, you can be sure that it will stay in place.
Step 6: Attach the Foam Roller to the Other End
Once you have one end of the cover securely in place, repeat the same procedure with the other side of the couch. Start by draping it over and securing it with pins, then attach a foam roller to help keep the fabric taut.
It’s important to take the time to make sure that both ends are correctly fitted, as this will help to ensure a wrinkle-free fit. It’s also important to regularly check the fit of each side while you are working, as this will help to make sure that everything is lined up properly.
Step 7: Smooth Out Wrinkles
Now that both ends of the cover are in place, you can begin to smooth out any wrinkles using your hands. Make sure that all of the fabric is lying flat against the couch and check for any gaps or areas where the fabric isn’t attached properly. But remember, if you do find any problem areas, you can always adjust the pins and re-position the foam roller to get a better fit.
Step 8: Add More Pins as Needed
Once all of the wrinkles have been taken care of, you may need to add more pins in order to keep the cover secure. Make sure that each pin goes through both layers of fabric so that there are no gaps or loose areas on the couch.
This will help to ensure a snug fit and keep the cover from slipping off. If you find that the cover is still too loose, consider using more foam rollers for additional support. This will help to keep the fabric taut and give you a wrinkle-free, professional finish.
Step 9: Remove the Foam Roller
Once all of the wrinkles have been taken care of and all of the pins are in place, you can now remove the foam roller. This will help to ensure that the fabric looks smooth and wrinkle-free once it’s fully in place.
You can also use a vacuum cleaner attachment to remove any excess lint or debris from the fabric. It’s also a good idea to use an upholstery cleaner or fabric protector spray to protect the material from further damage. But make sure to read and follow all instructions before applying any products.
Step 10: Adjust the Cover as Needed
Depending on how tight or loose you want your cover to be, you may need to adjust the pins accordingly. Make sure to keep the fabric taut, but not too tight as this may cause it to tear over time. Otherwise, you can use additional pins or foam rollers if needed.
But remember to take your time and make sure that everything is properly fitted before continuing on. It’s also important to regularly check the fit of the cover and adjust it as needed. You can do this by simply running your hand over the fabric to make sure that there are no gaps or areas where the cover isn’t securely fastened.
Step 11: Enjoy Your New Look
You’re done! Now you can sit back and enjoy your newly updated and rejuvenated couch. Not only does it look better than before, but with a snug-fitting cover, it will also be better protected from wear and tear. Always remember to check the cover every few months to make sure it’s still securely in place and free from any wrinkles.
Always make sure to follow the instructions on any products you use, as this will help to ensure a long-lasting and wrinkle-free look. If you’ve followed all of the steps, you should be proud of your new look – a perfect blend of comfort and style!
Now you know how to put on a couch cover with foam roller! Not only is it easy to do, but it also helps to keep your couch looking great for years to come. With just a few simple steps, you can give your living space an instant facelift without having to
Conclusion
All in all, being able to put on a couch cover with a foam roller is a great way to protect your furniture from everyday wear and tear. Not only will it make your couch look like new, but it will also help to increase its lifespan. Plus, with how easy the process is, you won’t have any excuses for not protecting your couch!
With this knowledge in mind and by following these simple steps on how to put on a couch cover with foam roller, you’ll be able to transform your worn-out-looking sofa into a beautiful centerpiece for your living room space in no time. So go ahead and give it a try – you’ll be glad you did!
