Are you struggling with how to fix a sagging recliner seat? Don’t worry, it’s not as difficult as you think. With a few simple steps, you can get your recliner back in shape and look great.
The recliner is a quintessential piece of furniture and has been around for as long as anyone can remember. It’s a great way to relax and unwind after a long day, but over time they tend to start looking rather worn out – especially the seat cushions that start sagging in all the wrong places.
If your recliner seat isn’t giving you the same level of comfort it did before, don’t worry – there is hope!
Today we are going to discuss how to fix sagging recliner seat so your favorite chair looks brand new again – without needing professional help or taking too much time to reupholster completely.
What Will You Need?
Before we get started, let’s make sure you have all the tools and materials you will need to fix your recliner:
- A box spring or another flat, supportive surface.
- Plywood that fits the seat of your recliner.
- Staple gun and staples.
- The fabric of your choice to cover the plywood.
- Tape measure
Now that you’ve gathered all the materials let’s dive into how to fix a sagging recliner seat.
10 Easy Steps on How to Fix Sagging Recliner Seat
Step 1. Measure the Seat Cushion:
Use a tape measure to find how wide and how deep the seat cushion is. Make sure to measure both sides of the recliner, as they are usually not the same. If you have an armrest, measure that too.
Step 2. Make a Plywood Piece:
Using the measurements from Step 1, cut a piece of plywood that is the same size as your seat cushion (or slightly larger). It should fit snugly in the seat when you place it inside. Don’t forget to sand down the edges of the plywood so that they’re smooth.
Step 3. Cover Plywood in Fabric:
Lay out the fabric and place the plywood on top. Pull the fabric around to cover all sides, ensuring there aren’t any wrinkles or folds in the fabric. Cut away excess material with scissors if necessary.
Step 4. Attach Plywood to Seat:
Using a staple gun, begin stapling one corner of the plywood to one side of the recliner seat, working from corner to corner until it is fully secured in place. Make sure not to overstretch or pull too tightly on the fabric when you do this. You should still be able to move the fabric a little bit.
Step 5. Secure the Fabric:
Once you have secured the plywood to the seat of your recliner, begin stapling down the excess fabric around its edges. Make sure not to staple them too close together or too tightly. This will cause more wrinkles and folds in the fabric, eventually leading to sagging again.
Step 6. Secure Armrests (if applicable):
If your recliner has armrests, ensure they are securely attached by following Steps 4 and 5 above with the armrests instead of the seat cushion itself. Don’t forget to measure the armrests before cutting and stapling down your plywood. It is important that the armrests remain strong and supportive when you are finished.
Step 7: Cut Away Excess Fabric:
Take scissors and cut away any excess fabric hanging off the seat’s edges. Make sure to leave at least an inch of fabric for a nice finished look. Because the fabric is cut to size, it should stay in place and not shift around.
Step 8: Add Extra Support (if Necessary):
If you feel like the seat is still sagging a little, you can add extra support in the form of foam inserts or other padding material. Simply attach them to your plywood with staples and then cover them with fabric as well. Don’t forget to measure how much padding you need and how thick it should be before attaching it.
Step 9: Reinforce Corners:
Make sure all corners are tightly secured by folding over any excess fabric and stapling it down, ensuring that each corner is completely flat. Be careful not to staple too close together or you could puncture the fabric. Otherwise, this step should be fairly easy and straightforward.
Step 10: Enjoy Your New Recliner Seat!
Now that you’ve followed these steps give your recliner a test run and make sure it is comfortable enough for you. With any luck, your recliner seat will last many years! Remember to give it a once-over every now and then just to make sure everything is how it should be.
Fixing a sagging recliner seat doesn’t have to be hard or expensive – with just a little effort, you can make your recliner look new again! Try out these steps and see how easy revitalizing your favorite piece of furniture is.
5 Additional Tips and Tricks
- Try adjusting the tension on your recliner’s springs. This will help to lift the seat back up and make it more supportive.
- If your recliner has a flat support, you can add foam or batting to the seat and back of the chair to make it firmer.
- You can also try adding an extra cushion on top of the existing seat cushion to take up some of the sags.
- If your recliner has a removable backrest, you can flip it over to better support your weight properly.
- Finally, if all else fails, consider replacing the springs in your recliner – this is sure to alleviate any sagging issues!
By following these simple tips and tricks, you’ll be able to fix that sagging recliner without having to buy a new one!
5 Things You Should Avoid
- Don’t use old, worn-out springs. As the springs age and lose their tension, they won’t be able to properly support the recliner seat’s weight properly and will cause it to sag.
- Don’t try to fix a sagging recliner seat with thin or inadequate padding. This may provide short-term comfort but won’t address the underlying issue of how to fix a sagging recliner seat.
- Avoid overstuffing your recliner with pillows and other items that can put extra weight on the frame and cause it to sag further over time.
- Don’t forget how important regular maintenance is for fixing sagging recliner seats. Inspect your chair often for signs of wear and tear, such as frayed cloth, broken springs, and excess padding.
- Don’t ignore the importance of using the correct type of upholstery to fix the sagging recliner seat. Select a durable material to support your weight without wearing out quickly or becoming misshapen over time. This will help ensure that you get years of comfort from your recliner.
Follow these tips, and you’ll be able to enjoy long-lasting comfort with your recliner! With the right maintenance and care, fixing sagging recliner seats won’t be an issue anymore!
How Do You Fix a Sagging Recliner Footrest?
If your recliner footrest is sagging, the quickest and easiest way to fix it is by tightening up the screws.
These should be located at each corner of the footrest itself and can usually be tightened by hand or with a screwdriver.
Another option is to invest in new springs for your recliner footrest – either replacing them entirely or just adding extra ones to give it some additional support. You can also try adding foam padding around the edges of the footrest for an extra layer of comfort.
Finally, if there’s any excess fabric hanging from the base of your recliner, make sure to tuck it in so that it doesn’t get caught on anything and cause further damage.
Overall, fixing a sagging recliner footrest is relatively easy and can quickly help your furniture look better and last longer. By following the tips above, you’ll be able to get your recliner back in shape in no time!
Conclusion
To sum it all up, making a few easy changes to your sagging recliner seat can greatly affect its look and comfort level. Sure, you may have to invest in new cushioning, recovering it, or using a foam sheet; however, this investment might make all the difference – transforming the look of your living space and making it much more comfortable for everyone. Furthermore, don’t forget that with normal use and frequent wear and tear, customers should anticipate having to eventually switch out their recliners for new ones – or at least make adjustments along the way. However, with proper maintenance, restorations, and care, you could put off that switch for an even longer period.
Addressing issues such as these provides customers with the opportunity to make life at home much more bearable – expanding on comfort levels while saving some money!
Hopefully, the article on how to fix sagging recliner seat has been able to provide you with some helpful tips and advice on how to go about restoring your recliner. Thanks for your valuable time. Good luck!
