Are you tired of dealing with a loose arm on your recliner? Don’t worry, there’s an easy fix for that! Here are the steps on how to fix loose arm on recliner you need to take.
When purchasing a recliner, you expect to be able to relax and kick your feet up for years. But if the arms on your favorite chair start becoming loose or fall off entirely, it can quickly become an eyesore in any room – and an uncomfortable seat at that!
Fortunately, with a few simple tools and some know-how of how the arm attaches, fixing a loose arm on your recliner is easier than you think. In this blog post, we’ll take a look at some easy steps you can take to repair your recliner’s arm without having to buy new furniture or hire someone else to do it for you!
What Will You Need?
Before you start, there are a few simple tools and supplies you’ll need to fix the loose arm on your recliner:
- Screwdriver or drill
- New screws
- Wrench
- Hammer
- Tape measure or ruler
Once you have all the tools and supplies ready, it’s time to get started on repairing your recliner.
10 Easy Steps on How to Fix Loose Arm on Recliner
Step 1. Remove the Old Screws:
Using a screwdriver or drill, remove all the screws that are holding the loose arm in place. Depending on your recliner model, there may be more than one screw. Be careful and make sure all the screws are removed before you proceed.
Step 2. Measure the Length of the Arm:
Using a tape measure or ruler, measure the length of the arm from the bottom to the top. This will help you determine how long your new screws need to be. If the arm is too long, you’ll need to trim it down so it fits snugly.
Step 3. Choose New Screws:
Once you’ve got the measurements, it’s time to choose some new screws for your recliner’s arm. Make sure to get screws that are slightly longer than what you measured so there is no gap between the arm and the frame. Don’t forget to buy screws that are compatible with the type of material your recliner is made from.
Step 4. Pre-drill Holes in New Screws:
Using a drill, pre-drill holes into each of your new screws where they need to go on the arm of the recliner – this will make it easier to attach them later on. There should be two pre-drilled holes, one at the top and one at the bottom of the arm. Ensure the screws are level before drilling.
Step 5. Align and Attach Arm to Frame:
Once your new screws are ready, it’s time to attach the arms of the recliner back onto the frame. Line up the arm with the frame and insert your new screws in place. If the screws don’t fit, you may need to use a wrench and hammer to secure them.
Step 6. Secure Arm with Wrench:
Tighten each of your new screws using a wrench until you’re certain they are firmly secured in place. Make sure to use even pressure when tightening, so you don’t cause any further damage to your recliner’s arm or frame. It will also help to use earplugs while you do this, as the sound of metal on metal can be quite loud!
Step 7. Check for Gaps:
Once your new screws are secure, step back and check for any gaps between the arm and frame. If there is a gap, use a hammer or mallet to tap it down until it fits snugly. This will help ensure that your arm is properly attached.
Step 8. Test for Stability:
Now that the arm is firmly in place, it’s time to test it out! Apply pressure to the arm and check to see if it moves or wobbles at all. If there is any movement, you may need to add one more screw or tighten the existing screws further.
Step 9. Reattach Upholstery:
If your recliner has upholstery, you’ll need to reattach it before you can use the chair again. This step requires some precision as you want to ensure the upholstery is secure while still allowing enough room for movements like reclining and swiveling. Additionally, be sure to use a fabric-safe adhesive or tape for this step.
Step 10. Enjoy Your Recliner Again:
Once your recliner is securely reassembled, and all the upholstery is in place, it’s time to enjoy your repaired chair! Make sure to check on it periodically to ensure no further problems arise. With these easy steps, you have successfully fixed the loose arm on your recliner!
Congratulations – you’ve just saved yourself some money and got your recliner back into shape with minimal effort. Now that you know how to fix a loose arm on a recliner, you can be confidently juggling any subsequent furniture repairs that may come up in the future.
5 Additional Tips and Tricks
- If the arm is detached from the frame, take a look at the screws and bolts on both sides of the arm. Check to make sure they are securely fastened and tighten them as needed.
- Check around the arms for any visible signs of wear or damage that could be causing it to become loose. If you find any damage, you may need to replace the arm or have it professionally repaired.
- Make sure there is no fabric wearing through on either side of the arm that can cause extra pressure on it and make it unstable.
- Tighten any straps underneath or in between cushions that may be pulling on it and putting too much stress on its joints causing it to come loose over time.
- If all else fails, it may be time to invest in a new arm for your recliner as the original one may no longer be secure. There are plenty of options available online or at your local furniture store so you can find something that matches your existing chair.
With these tips and tricks, you should now know how to fix loose arm on recliner easily! Good luck with your repair project!
5 Things You Should Avoid
- Don’t try to tighten the screws with a regular screwdriver since it can damage them.
- Avoid using too much force with an Allen wrench or socket wrench when tightening the screws, as this may strip the threads in the frame of your recliner.
- Do not over-tighten the screws – doing so can cause additional stress on the recliner arm and weaken its joints.
- Do not use glue or other adhesives to repair a loose arm – these materials can degrade over time and further compromise the strength of the joint.
- Never hammer away at a loose arm – this will only damage your furniture and walls!
Always keep in mind that fixing a loose arm isn’t a job that can be done quickly or without the proper tools. Follow the instructions carefully and use caution when attempting to reattach an arm on your recliner. With patience, you can easily fix a loose arm on your own.
What is the Best Way to Sit in a Recliner?
The best way to sit in a recliner is with your back flush against the seat and your feet flat on the floor. This will allow you to use a recliner’s full range of motion and support.
Additionally, be sure to adjust the recline settings so that it’s comfortable for you. Too much or too little can cause back pain or soreness. Lastly, ensure not to over-recline, as this can create an unsafe angle if you attempt to get up suddenly. With these tips, you’ll stay safe and enjoy the comfort of your recliner!
Overall, following the steps in this guide, you should now know to fix loose arms on a recliner with minimal effort! With a few simple tools and patience, your recliner will be back in action in no time. Enjoy your repaired chair – happy reclining!
Conclusion
While adjusting a recliner arm is not the most difficult repair it can be intimidating without the proper instructions. Fortunately, the steps listed above are easy to follow and provide great results. With the correct tools and knowledge, you should now feel confident in your ability to adjust and secure loose arms on a recliner.
If, for some reason, none of these steps worked, however, your next step may be to take the arm off completely and find replacement parts with different measurements or sizes that will fit against your chair correctly.
Remember, replacing old furniture parts or tightening an arm on a recliner is not always easy and might require extra time and patience; however, with the right guidance, you can do it successfully!
Hopefully, this guide on how to fix loose arm on recliner has provided you with the information you need to adjust or replace a recliner arm. Good luck!
