Do you find yourself dreaming of a garden oasis, but not sure where to begin? Building planter stands can be a great way to start! Not only do they look beautiful on your porch or patio, but the creative project is also an easy and affordable way to raise your plants off the ground. Best of all, it’s something that practically anyone can learn how to do!
In this blog post on how to build planter stand we’ll cover everything from materials needed for construction and steps on building the stand, so grab your tools and let’s get started!
What is Planter Stand?
Planter stands, also known as plant stands or pot holders, are elevated platforms used to hold planters and provide support for plants. They can range from basic to elaborate in design and can be made of wood, metal, plastic or other materials. The size and shape of the stand depend on what you want it to look like and the type of plants you’ll be growing.
Materials Needed for Construction
Given below-needed materials on this project:
- Wood Boards
- Nails or Screws
- Sandpaper
- Drill
- Hammer
- Paint/Stain (Optional)
Pros and Cons
Given below pros and cons of the project:
Pros
- Planter stands to add visual interest to your garden space.
- You Can Choose From a Variety of Materials to Customize the Look of Your Planter Stand.
- Since Planter Stands Are Elevated, They Help Keep Plants Off the Ground, Away From Pests and Moisture.
- They Are Relatively Easy and Inexpensive to Make.
Cons
- You May Need to Use a Drill and Other Tools During Construction.
- Planter Stands Can Be Bulky, So They May Take Up a Lot of Space in Your Garden.
- If Not Properly Secured, the Planter Stands Could Tip Over When It is Filled With Soil and Plants.
11 Step-by-step Guidelines on How to Build Planter Stand
Step 1: Measure and Cut the Boards to Size
The pieces should be measured to fit the height, width, and depth of the planter stand you want. Once you have the measurements, cut the pieces of wood to size with a saw. It’s important to measure each piece, as they will need to fit together.
This should take about 15 minutes. It is also important to wear safety goggles and a dust mask when cutting with power tools. If you don’t have a saw, you can use a jigsaw or circular saw. But remember to use caution and follow the safety instructions on how to operate such tools.
Step 2: Assemble the Frame
Lay out the frame pieces on a flat surface. Secure each corner joint using either two nails or one screw. Make sure to countersink any nails so they’re flush against the wood and won’t stick out. This should take about 20 minutes. This should take about 20 minutes.
That’s it – you’ve completed the frame! But if you want to add a few extra touches before moving on, now is the time. This could include adding a coat of paint or stain, sanding the edges to make it look more finished, or using decorative moldings.
Step 3: Attach Side Pieces
Attach the side pieces to the top and bottom boards of your planter stand frame using screws or nails. Again, make sure to countersink any fasteners so that they don’t stick out from the frame. It should only take about 10 minutes.
But if you feel like getting creative, add some decorative touches such as painting the side pieces in a complementary color or distress them for a rustic look. This should take about 10 minutes. But if you feel like getting creative, add some decorative touches such as painting the side pieces in a complementary color or distress them for a rustic look.
Step 4: Sand Down All Edges
Once you’ve finished assembling your planter stand frame, use sandpaper to smooth down any rough edges. This will help create a finished look and also make sure your hands won’t get splinters when you go to move the piece of furniture.
This should only take about 5 minutes. But if you want to go the extra mile, consider finishing the stand with a sealer to protect the wood and enhance its natural beauty. This should take about 5 minutes.
Step 5: Add Support Legs (Optional)
Depending on the size and shape of your planter stand, you may want to add support legs for extra stability. To do this, measure out each leg individually and cut them from wood boards.
Then attach them to the bottom board with screws or nails. This should take about 10 minutes. If you’re feeling adventurous, you can even add caster wheels to the bottom of the planter stand for easy mobility.
Step 6: Finish Your Planter Stand
If desired, give your planter stand a finish by painting or staining it. Make sure to use paint that is intended for outdoor use and will stand up to the elements. It should take about 10 minutes.
Once you’re done, let the paint dry completely before adding your plants and soil. But if you’re not a fan of painting, you can also opt to leave the wood in its natural state and just seal it with a protective finish. However, the sealer won’t protect against moisture or sun damage.
Step 7: Let Dry
Once you’ve applied a finish, let it dry completely before moving on to the next step. But if you’re not adding a finish, you can proceed to the next step immediately. It should take about 15 minutes. But if you’re in a hurry, you can speed up the drying time with a hairdryer or fan.
It should only take about 5 minutes. This is the last step before you can add your plants and soil. If you’re using an outdoor planter stand, make sure to bring it inside during cold or inclement weather. But if you’ve opted for an indoor version, it can stay outdoors year-round.
Step 8: Attach Hardware Clips (Optional)
If you plan on hanging baskets from your planter stand, install hardware clips along the sides. This will give you a place to attach your hanging basket chains or wire. If you’re using plastic clips, simply screw them into place.
But if you’re using metal clips, make sure to use an appropriate fastener for the material. It should take about 10 minutes. But if you want to go the extra mile, consider adding decorations such as ribbons or bells for a whimsical touch. This should take about 5 minutes.
Step 9: Add Planters
Now that your planter stand is finished, it’s time to fill it with plants! Choose planters of different sizes and shapes for more visual interest, but make sure their weight won’t be too much for the structure of your stand. It should take about 5 minutes.
But if you’re feeling creative, consider adding decorative elements to the planters such as flowers or vines. This should take about 5 minutes. However, if you’re using an outdoor planter stand, make sure to use weather-resistant plants and materials. It should take about 5 minutes.
Step 10: Place Your Planter Stand
Finally, it’s time to place your planter stand in its desired location. Make sure it is stable and secure before adding any plants or other decorations. It should take about 5 minutes. And that’s it – you’re done! Now all you have to do is enjoy your beautiful new planter stand.
But if you’re feeling adventurous, consider adding lights or wind chimes to make it even more special. This should take about 5 minutes. But no matter how you decide to decorate it, your planter stands will be sure to add beauty and character to its surroundings.
Step 11: Decorate As Desired!
Once your planter stands are set up and filled with plants, you can add other decorative touches such as fairy lights or a birdhouse for more visual interest. The possibilities are endless! It should take about 5 minutes.
But no matter how you decide to decorate it, your planter stands will be sure to add beauty and character to its surroundings. But remember, if you’re using an outdoor planter stand, make sure to bring it inside during cold or inclement weather. This will ensure that your plants and decorations stay safe.
And there you have it – a step-by-step guide on how to build planter stands! With the right materials, tools and instructions, anyone can create beautiful planter stands for their home or garden. Now all you have to do is get started!
Congratulations! You have now successfully learned how to build planter stand. This easy project will not only enhance the look of your outdoor space but also provide support for your beautiful plants. Enjoy!
Do You Need to Use a Professional?
In most cases, building a planter stand is a relatively straightforward task and can be done by anyone with basic DIY skills. However, if you don’t feel comfortable doing it yourself or don’t have the right tools and materials available, you may want to consider hiring a professional.
A good carpenter or contractor will be able to complete this project quickly and efficiently so that you can enjoy your new planter stand in no time!
Frequently Asked Questions
Q: What Materials Do I Need to Build a Planter Stand?
A: You will need wood boards, screws or nails, sandpaper, a drill, a hammer, and optionally paint or stain.
Q: How Do I Attach the Support Legs?
A: Measure out each leg individually and cut them from wood boards. Then attach them to the bottom board with screws or nails.
Q: What Type of Paint Should I Use?
A: Make sure to use paint that is intended for outdoor use and will stand up to the elements. This will ensure your planter stand remains to look good for years to come.
Q: Can I Hang Baskets from My Planter Stand?
A: Yes, you can hang baskets from your planter stand by installing hardware clips along the sides. This will give you a place to attach your hanging basket chains or wire.
Conclusion
Building a planter stand is a great way to add a little beauty and style to your outdoor living space. Whether you’re crafting the perfect spot for a single potted plant or planning something larger, using salvaged materials can help you get the job done with just a few tools.
You can create an interesting and distinctive look all your own while adding instant character to your patio or backyard.
Don’t be afraid to get creative and experiment – it could give you unexpected results that turn out even better than what you had imagined! So gather up some wood, grab some tools, and embark on this rustic garden project – your own DIY planter stand awaits! Thanks for reading this article on how to build planter stand.
